From: Werner Sembach wse@tuxedocomputers.com
commit cbedf1a33970c9b825ae75b81fbd3e88e224a418 upstream.
A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them.
I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use, no negative effects could be observed when setting all four.
Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after boot and sometimes also after resume. However both are required for the keyboard to not fail completely sometimes after boot or resume.
Signed-off-by: Werner Sembach wse@tuxedocomputers.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/input/serio/i8042-acpipnpio.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
--- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1117,11 +1117,39 @@ static const struct dmi_system_id i8042_ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, { + /* + * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes + * the keyboard very laggy for ~5 seconds after boot and + * sometimes also after resume. + * However both are required for the keyboard to not fail + * completely sometimes after boot or resume. + */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "N150CU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"), }, .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes + * the keyboard very laggy for ~5 seconds after boot and + * sometimes also after resume. + * However both are required for the keyboard to not fail + * completely sometimes after boot or resume. + */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, { .matches = {