Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added suspend support for the Renesas I2C driver and following this change on RZ/G3E the following WARNING is seen on entering suspend ...
[ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 134.285536] ------------[ cut here ]------------ [ 134.290298] i2c i2c-2: Transfer while suspended [ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388 [ 134.365507] Tainted: [W]=WARN [ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT) [ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214 [ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214 [ 134.391717] sp : ffff800083f23860 [ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60 [ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001 [ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936 [ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006 [ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280 [ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09 [ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8 [ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000 [ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000 [ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80 [ 134.466851] Call trace: [ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P) [ 134.473715] i2c_smbus_xfer+0xbc/0x120 [ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84 [ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208] [ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208] [ 134.493226] __rtc_read_time+0x44/0x88 [ 134.497012] rtc_read_time+0x3c/0x68 [ 134.500622] rtc_suspend+0x9c/0x170
The warning is triggered because I2C transfers can still be attempted while the controller is already suspended, due to inappropriate ordering of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once runtime PM disabled (in suspend_late()). During system resume, the I2C controller will be available only after runtime PM is re-enabled (in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is still enabled. The I2C controller will remain available until the suspend_noirq() callback (pm_runtime_force_suspend()) is called. During resume, the I2C controller can be restored by the resume_noirq() callback (pm_runtime_force_resume()). Finally, the resume() callback re-enables autosuspend. As a result, the I2C controller can remain available until the system enters suspend_noirq() and from resume_noirq().
Cc: stable@vger.kernel.org Fixes: 53326135d0e0 ("i2c: riic: Add suspend/resume support") Signed-off-by: Tommaso Merciai tommaso.merciai.xr@bp.renesas.com --- v1->v2: - Taking as reference commit: 4262df2a69c3 ("i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().") reworked the patch with a similar approach. Updated commit body accordingly.
drivers/i2c/busses/i2c-riic.c | 46 +++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 3e8f126cb7f7..9e3595b3623e 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -670,12 +670,39 @@ static const struct riic_of_data riic_rz_t2h_info = {
static int riic_i2c_suspend(struct device *dev) { - struct riic_dev *riic = dev_get_drvdata(dev); - int ret; + /* + * Some I2C devices may need the I2C controller to remain active + * during resume_noirq() or suspend_noirq(). If the controller is + * autosuspended, there is no way to wake it up once runtime PM is + * disabled (in suspend_late()). + * + * During system resume, the I2C controller will be available only + * after runtime PM is re-enabled (in resume_early()). However, this + * may be too late for some devices. + * + * Wake up the controller in the suspend() callback while runtime PM + * is still enabled. The I2C controller will remain available until + * the suspend_noirq() callback (pm_runtime_force_suspend()) is + * called. During resume, the I2C controller can be restored by the + * resume_noirq() callback (pm_runtime_force_resume()). + * + * Finally, the resume() callback re-enables autosuspend, ensuring + * the I2C controller remains available until the system enters + * suspend_noirq() and from resume_noirq(). + */ + return pm_runtime_resume_and_get(dev); +}
- ret = pm_runtime_resume_and_get(dev); - if (ret) - return ret; +static int riic_i2c_resume(struct device *dev) +{ + pm_runtime_put_autosuspend(dev); + + return 0; +} + +static int riic_i2c_suspend_noirq(struct device *dev) +{ + struct riic_dev *riic = dev_get_drvdata(dev);
i2c_mark_adapter_suspended(&riic->adapter);
@@ -683,12 +710,12 @@ static int riic_i2c_suspend(struct device *dev) riic_clear_set_bit(riic, ICCR1_ICE, 0, RIIC_ICCR1);
pm_runtime_mark_last_busy(dev); - pm_runtime_put_sync(dev); + pm_runtime_force_suspend(dev);
return reset_control_assert(riic->rstc); }
-static int riic_i2c_resume(struct device *dev) +static int riic_i2c_resume_noirq(struct device *dev) { struct riic_dev *riic = dev_get_drvdata(dev); int ret; @@ -697,6 +724,10 @@ static int riic_i2c_resume(struct device *dev) if (ret) return ret;
+ ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + ret = riic_init_hw(riic); if (ret) { /* @@ -714,6 +745,7 @@ static int riic_i2c_resume(struct device *dev) }
static const struct dev_pm_ops riic_i2c_pm_ops = { + NOIRQ_SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend_noirq, riic_i2c_resume_noirq) SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend, riic_i2c_resume) };