Hello,
This series disables the "serdes_wiz0" and "serdes_wiz1" device-tree nodes in the J722S SoC file and enables them in the board files where they are required along with "serdes0" and "serdes1". There are two reasons behind this change: 1. To follow the existing convention of disabling nodes in the SoC file and enabling them in the board file as required. 2. To address situations where a board file hasn't explicitly disabled "serdes_wiz0" and "serdes_wiz1" (example: am67a-beagley-ai.dts) as a result of which booting the board displays the following errors: wiz bus@f0000:phy@f000000: probe with driver wiz failed with error -12 ... wiz bus@f0000:phy@f010000: probe with driver wiz failed with error -12
Series is based on linux-next tagged next-20250408.
v1 of this series is at: https://lore.kernel.org/r/20250408060636.3413856-1-s-vadapalli@ti.com/ Changes since v1: - Added "Fixes" tag and updated commit message accordingly.
Regards, Siddharth.
Siddharth Vadapalli (2): arm64: dts: ti: k3-j722s-evm: Enable "serdes_wiz0" and "serdes_wiz1" arm64: dts: ti: k3-j722s-main: Disable "serdes_wiz0" and "serdes_wiz1"
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 8 ++++++++ arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 4 ++++ 2 files changed, 12 insertions(+)