From: Durai Manickam KR durai.manickamkr@microchip.com
[ Upstream commit f6ad3c13f1b8c4e785cb7bd423887197142f47b0 ]
Remove the dbgu compatible strings in the UART submodule of the flexcom for the proper SOC detection.
Fixes: 99c808335877 (ARM: dts: at91: sam9x60: Add missing flexcom definitions) Signed-off-by: Durai Manickam KR durai.manickamkr@microchip.com Link: https://lore.kernel.org/r/20230712100042.317856-1-durai.manickamkr@microchip... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sam9x60.dtsi | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 8b53997675e75..73d570a172690 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -172,7 +172,7 @@ status = "disabled";
uart4: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -240,7 +240,7 @@ status = "disabled";
uart5: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; @@ -370,7 +370,7 @@ status = "disabled";
uart11: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -419,7 +419,7 @@ status = "disabled";
uart12: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -576,7 +576,7 @@ status = "disabled";
uart6: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -625,7 +625,7 @@ status = "disabled";
uart7: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -674,7 +674,7 @@ status = "disabled";
uart8: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -723,7 +723,7 @@ status = "disabled";
uart0: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -791,7 +791,7 @@ status = "disabled";
uart1: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -859,7 +859,7 @@ status = "disabled";
uart2: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -927,7 +927,7 @@ status = "disabled";
uart3: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -1050,7 +1050,7 @@ status = "disabled";
uart9: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -1099,7 +1099,7 @@ status = "disabled";
uart10: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0