From: Edwin Peer edwin.peer@broadcom.com
commit 2a5a8800fa915bd9bc272c91ca64728e6aa84c0a upstream.
The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6).
Also remove the related and no longer used definitions from bnxt.h.
Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer edwin.peer@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 14 ++++---------- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 ----- 2 files changed, 4 insertions(+), 15 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4184,14 +4184,12 @@ static int bnxt_hwrm_do_send_msg(struct int i, intr_process, rc, tmo_count; struct input *req = msg; u32 *data = msg; - __le32 *resp_len; u8 *valid; u16 cp_ring_id, len = 0; struct hwrm_err_output *resp = bp->hwrm_cmd_resp_addr; u16 max_req_len = BNXT_HWRM_MAX_REQ_LEN; struct hwrm_short_input short_input = {0}; u32 doorbell_offset = BNXT_GRCPF_REG_CHIMP_COMM_TRIGGER; - u8 *resp_addr = (u8 *)bp->hwrm_cmd_resp_addr; u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM; u16 dst = BNXT_HWRM_CHNL_CHIMP;
@@ -4209,7 +4207,6 @@ static int bnxt_hwrm_do_send_msg(struct bar_offset = BNXT_GRCPF_REG_KONG_COMM; doorbell_offset = BNXT_GRCPF_REG_KONG_COMM_TRIGGER; resp = bp->hwrm_cmd_kong_resp_addr; - resp_addr = (u8 *)bp->hwrm_cmd_kong_resp_addr; }
memset(resp, 0, PAGE_SIZE); @@ -4278,7 +4275,6 @@ static int bnxt_hwrm_do_send_msg(struct tmo_count = HWRM_SHORT_TIMEOUT_COUNTER; timeout = timeout - HWRM_SHORT_MIN_TIMEOUT * HWRM_SHORT_TIMEOUT_COUNTER; tmo_count += DIV_ROUND_UP(timeout, HWRM_MIN_TIMEOUT); - resp_len = (__le32 *)(resp_addr + HWRM_RESP_LEN_OFFSET);
if (intr_process) { u16 seq_id = bp->hwrm_intr_seq_id; @@ -4306,9 +4302,8 @@ static int bnxt_hwrm_do_send_msg(struct le16_to_cpu(req->req_type)); return -EBUSY; } - len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >> - HWRM_RESP_LEN_SFT; - valid = resp_addr + len - 1; + len = le16_to_cpu(resp->resp_len); + valid = ((u8 *)resp) + len - 1; } else { int j;
@@ -4319,8 +4314,7 @@ static int bnxt_hwrm_do_send_msg(struct */ if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state)) return -EBUSY; - len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >> - HWRM_RESP_LEN_SFT; + len = le16_to_cpu(resp->resp_len); if (len) break; /* on first few passes, just barely sleep */ @@ -4342,7 +4336,7 @@ static int bnxt_hwrm_do_send_msg(struct }
/* Last byte of resp contains valid bit */ - valid = resp_addr + len - 1; + valid = ((u8 *)resp) + len - 1; for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) { /* make sure we read from updated DMA memory */ dma_rmb(); --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -654,11 +654,6 @@ struct nqe_cn { #define HWRM_CMD_TIMEOUT (bp->hwrm_cmd_timeout) #define HWRM_RESET_TIMEOUT ((HWRM_CMD_TIMEOUT) * 4) #define HWRM_COREDUMP_TIMEOUT ((HWRM_CMD_TIMEOUT) * 12) -#define HWRM_RESP_ERR_CODE_MASK 0xffff -#define HWRM_RESP_LEN_OFFSET 4 -#define HWRM_RESP_LEN_MASK 0xffff0000 -#define HWRM_RESP_LEN_SFT 16 -#define HWRM_RESP_VALID_MASK 0xff000000 #define BNXT_HWRM_REQ_MAX_SIZE 128 #define BNXT_HWRM_REQS_PER_PAGE (BNXT_PAGE_SIZE / \ BNXT_HWRM_REQ_MAX_SIZE)