From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.
As DMA Rx can be completed from two places, it is possible that DMA Rx completes before DMA completion callback had a chance to complete it. Once the previous DMA Rx has been completed, a new one can be started on the next UART interrupt. The following race is possible (uart_unlock_and_check_sysrq_irqrestore() replaced with spin_unlock_irqrestore() for simplicity/clarity):
CPU0 CPU1 dma_rx_complete() serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma_flush() __dma_rx_complete() dma->rx_running = 0 // Complete DMA Rx spin_unlock_irqrestore(&port->lock)
serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma() dma->rx_running = 1 // Setup a new DMA Rx spin_unlock_irqrestore(&port->lock)
spin_lock_irqsave(&port->lock) // sees dma->rx_running = 1 __dma_rx_complete() dma->rx_running = 0 // Incorrectly complete // running DMA Rx
This race seems somewhat theoretical to occur for real but handle it correctly regardless. Check what is the DMA status before complething anything in __dma_rx_complete().
Reported-by: Gilles BULOZ gilles.buloz@kontron.com Tested-by: Gilles BULOZ gilles.buloz@kontron.com Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_dma.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -48,15 +48,23 @@ static void __dma_rx_complete(void *para struct uart_8250_dma *dma = p->dma; struct tty_port *tty_port = &p->port.state->port; struct dma_tx_state state; + enum dma_status dma_status; int count;
- dma->rx_running = 0; - dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + /* + * New DMA Rx can be started during the completion handler before it + * could acquire port's lock and it might still be ongoing. Don't to + * anything in such case. + */ + dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS) + return;
count = dma->rx_size - state.residue;
tty_insert_flip_string(tty_port, dma->rx_buf, count); p->port.icount.rx += count; + dma->rx_running = 0;
tty_flip_buffer_push(tty_port); }