[ Upstream commit 0487fff76632ec023d394a05b82e87a971db8c03 ]
Currently if a regulator has "<name>-fixed-regulator" property in device tree, it will skip current limit initialization. This lead to a zero "max_uA" value in struct ufs_vreg.
However, "regulator_set_load" operation shall be required on regulators which have valid current limits, otherwise a zero "max_uA" set by "regulator_set_load" may cause unexpected behavior when this regulator is enabled or set as high power mode.
Similarly, in device's icc_level configuration flow, the target icc_level shall be updated if regulator also has valid current limit, otherwise a wrong icc_level will be calculated by zero "max_uA" and thus causes unexpected results after it is written to device.
Signed-off-by: Stanley Chu stanley.chu@mediatek.com Reviewed-by: Avri Altman avri.altman@wdc.com Acked-by: Alim Akhtar alim.akhtar@samsung.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 6e80dfe4fa979..73156579e9885 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6130,19 +6130,19 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, goto out; }
- if (hba->vreg_info.vcc) + if (hba->vreg_info.vcc && hba->vreg_info.vcc->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vcc->max_uA, POWER_DESC_MAX_ACTV_ICC_LVLS - 1, &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]);
- if (hba->vreg_info.vccq) + if (hba->vreg_info.vccq && hba->vreg_info.vccq->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vccq->max_uA, icc_level, &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]);
- if (hba->vreg_info.vccq2) + if (hba->vreg_info.vccq2 && hba->vreg_info.vccq2->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vccq2->max_uA, icc_level, @@ -6767,6 +6767,15 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, if (!vreg) return 0;
+ /* + * "set_load" operation shall be required on those regulators + * which specifically configured current limitation. Otherwise + * zero max_uA may cause unexpected behavior when regulator is + * enabled or set as high power mode. + */ + if (!vreg->max_uA) + return 0; + ret = regulator_set_load(vreg->reg, ua); if (ret < 0) { dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n",