6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hrushikesh Salunke h-salunke@ti.com
[ Upstream commit bc8d9e6b5821c40ab5dd3a81e096cb114939de50 ]
J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on the EVM as a stacked USB connector which has one Type-A and one Type-C port. These Type-A and Type-C ports are connected to MUX so only one of them can be enabled at a time.
Commit under Fixes, tries to enable the USB0 instance of USB to interface with the Type-C port via the USB hub, by configuring the USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM that Type-A port is enabled instead of Type-C port.
Fix this by setting USB2.0_MUX_SEL to GPIO_ACTIVE_LOW to enable Type-C port.
Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM") Signed-off-by: Hrushikesh Salunke h-salunke@ti.com Reviewed-by: Roger Quadros rogerq@kernel.org Link: https://lore.kernel.org/r/20250116125726.2549489-1-h-salunke@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index d184e9c1a0a59..adee69607fdbf 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -590,7 +590,7 @@ p05-hog { /* P05 - USB2.0_MUX_SEL */ gpio-hog; - gpios = <5 GPIO_ACTIVE_HIGH>; + gpios = <5 GPIO_ACTIVE_LOW>; output-high; };