 
            On X Elite, the DP PHY needs another clock called ref, while all other platforms do not.
The current X Elite devices supported upstream work fine without this clock, because the boot firmware leaves this clock enabled. But we should not rely on that. Also, even though this change breaks the ABI, it is needed in order to make the driver disables this clock along with the other ones, for a proper bring-down of the entire PHY.
So in order to handle these clocks on different platforms, make the driver get all the clocks regardless of how many there are provided.
Cc: stable@vger.kernel.org # v6.10 Fixes: db83c107dc29 ("phy: qcom: edp: Add v6 specific ops and X1E80100 platform support") Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com Reviewed-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Abel Vesa abel.vesa@linaro.org --- drivers/phy/qualcomm/phy-qcom-edp.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index f1b51018683d51df064f60440864c6031638670c..06a08c9ea0f709106ceafa7b5f8c8c6856786a48 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -103,7 +103,9 @@ struct qcom_edp {
struct phy_configure_opts_dp dp_opts;
- struct clk_bulk_data clks[2]; + struct clk_bulk_data *clks; + int num_clks; + struct regulator_bulk_data supplies[2];
bool is_edp; @@ -218,7 +220,7 @@ static int qcom_edp_phy_init(struct phy *phy) if (ret) return ret;
- ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks); + ret = clk_bulk_prepare_enable(edp->num_clks, edp->clks); if (ret) goto out_disable_supplies;
@@ -885,7 +887,7 @@ static int qcom_edp_phy_exit(struct phy *phy) { struct qcom_edp *edp = phy_get_drvdata(phy);
- clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks); + clk_bulk_disable_unprepare(edp->num_clks, edp->clks); regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
return 0; @@ -1092,11 +1094,9 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) if (IS_ERR(edp->pll)) return PTR_ERR(edp->pll);
- edp->clks[0].id = "aux"; - edp->clks[1].id = "cfg_ahb"; - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(edp->clks), edp->clks); - if (ret) - return ret; + edp->num_clks = devm_clk_bulk_get_all(dev, &edp->clks); + if (edp->num_clks < 0) + return dev_err_probe(dev, edp->num_clks, "failed to get clocks\n");
edp->supplies[0].supply = "vdda-phy"; edp->supplies[1].supply = "vdda-pll";