6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dufresne nicolas.dufresne@collabora.com
[ Upstream commit 19c286b755072a22a063052f530a6b1fac8a1f63 ]
In some seek stress tests, we are getting IRQ from the G2 decoder where the dec_bus_int and the dec_e bits are high, meaning the decoder is still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we have reached completion and move the software reset to when our software watchdog triggers.
This way, we let the hardware continue on errors when it did not self reset and in worse case scenario the hardware timeout will automatically stop it. The actual error will be fixed in a follow up patch.
Fixes: 3385c514ecc5a ("media: hantro: Convert imx8m_vpu_g2_irq to helper") Cc: stable@vger.kernel.org Reviewed-by: Benjamin Gaignard benjamin.gaignard@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com Signed-off-by: Hans Verkuil hverkuil+cisco@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/platform/verisilicon/hantro_g2.c | 84 ++++++++++++---- drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c | 2 drivers/media/platform/verisilicon/hantro_g2_regs.h | 13 ++ drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c | 2 drivers/media/platform/verisilicon/hantro_hw.h | 1 drivers/media/platform/verisilicon/imx8m_vpu_hw.c | 2 6 files changed, 83 insertions(+), 21 deletions(-)
--- a/drivers/media/platform/verisilicon/hantro_g2.c +++ b/drivers/media/platform/verisilicon/hantro_g2.c @@ -5,43 +5,93 @@ * Copyright (C) 2021 Collabora Ltd, Andrzej Pietrasiewicz andrzej.p@collabora.com */
+#include <linux/delay.h> #include "hantro_hw.h" #include "hantro_g2_regs.h"
#define G2_ALIGN 16
-void hantro_g2_check_idle(struct hantro_dev *vpu) +static bool hantro_g2_active(struct hantro_ctx *ctx) { - int i; + struct hantro_dev *vpu = ctx->dev; + u32 status; + + status = vdpu_read(vpu, G2_REG_INTERRUPT); + + return (status & G2_REG_INTERRUPT_DEC_E); +}
- for (i = 0; i < 3; i++) { - u32 status; +/** + * hantro_g2_reset: + * @ctx: the hantro context + * + * Emulates a reset using Hantro abort function. Failing this procedure would + * results in programming a running IP which leads to CPU hang. + * + * Using a hard reset procedure instead is prefferred. + */ +void hantro_g2_reset(struct hantro_ctx *ctx) +{ + struct hantro_dev *vpu = ctx->dev; + u32 status;
- /* Make sure the VPU is idle */ - status = vdpu_read(vpu, G2_REG_INTERRUPT); - if (status & G2_REG_INTERRUPT_DEC_E) { - dev_warn(vpu->dev, "device still running, aborting"); - status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS; - vdpu_write(vpu, status, G2_REG_INTERRUPT); - } + status = vdpu_read(vpu, G2_REG_INTERRUPT); + if (status & G2_REG_INTERRUPT_DEC_E) { + dev_warn_ratelimited(vpu->dev, "device still running, aborting"); + status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS; + vdpu_write(vpu, status, G2_REG_INTERRUPT); + + do { + mdelay(1); + } while (hantro_g2_active(ctx)); } }
irqreturn_t hantro_g2_irq(int irq, void *dev_id) { struct hantro_dev *vpu = dev_id; - enum vb2_buffer_state state; u32 status;
status = vdpu_read(vpu, G2_REG_INTERRUPT); - state = (status & G2_REG_INTERRUPT_DEC_RDY_INT) ? - VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
- vdpu_write(vpu, 0, G2_REG_INTERRUPT); - vdpu_write(vpu, G2_REG_CONFIG_DEC_CLK_GATE_E, G2_REG_CONFIG); + if (!(status & G2_REG_INTERRUPT_DEC_IRQ)) + return IRQ_NONE; + + hantro_reg_write(vpu, &g2_dec_irq, 0); + hantro_reg_write(vpu, &g2_dec_int_stat, 0); + hantro_reg_write(vpu, &g2_clk_gate_e, 1); + + if (status & G2_REG_INTERRUPT_DEC_RDY_INT) { + hantro_irq_done(vpu, VB2_BUF_STATE_DONE); + return IRQ_HANDLED; + } + + if (status & G2_REG_INTERRUPT_DEC_ABORT_INT) { + /* disabled on abort, though lets be safe and handle it */ + dev_warn_ratelimited(vpu->dev, "decode operation aborted."); + return IRQ_HANDLED; + } + + if (status & G2_REG_INTERRUPT_DEC_LAST_SLICE_INT) + dev_warn_ratelimited(vpu->dev, "not all macroblocks were decoded."); + + if (status & G2_REG_INTERRUPT_DEC_BUS_INT) + dev_warn_ratelimited(vpu->dev, "bus error detected."); + + if (status & G2_REG_INTERRUPT_DEC_ERROR_INT) + dev_warn_ratelimited(vpu->dev, "decode error detected.");
- hantro_irq_done(vpu, state); + if (status & G2_REG_INTERRUPT_DEC_TIMEOUT) + dev_warn_ratelimited(vpu->dev, "frame decode timed out."); + + /** + * If the decoding haven't stopped, let it continue. The hardware timeout + * will trigger if it is trully stuck. + */ + if (status & G2_REG_INTERRUPT_DEC_E) + return IRQ_HANDLED;
+ hantro_irq_done(vpu, VB2_BUF_STATE_ERROR); return IRQ_HANDLED; }
--- a/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +++ b/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c @@ -578,8 +578,6 @@ int hantro_g2_hevc_dec_run(struct hantro struct hantro_dev *vpu = ctx->dev; int ret;
- hantro_g2_check_idle(vpu); - /* Prepare HEVC decoder context. */ ret = hantro_hevc_dec_prepare_run(ctx); if (ret) --- a/drivers/media/platform/verisilicon/hantro_g2_regs.h +++ b/drivers/media/platform/verisilicon/hantro_g2_regs.h @@ -22,7 +22,14 @@ #define G2_REG_VERSION G2_SWREG(0)
#define G2_REG_INTERRUPT G2_SWREG(1) +#define G2_REG_INTERRUPT_DEC_LAST_SLICE_INT BIT(19) +#define G2_REG_INTERRUPT_DEC_TIMEOUT BIT(18) +#define G2_REG_INTERRUPT_DEC_ERROR_INT BIT(16) +#define G2_REG_INTERRUPT_DEC_BUF_INT BIT(14) +#define G2_REG_INTERRUPT_DEC_BUS_INT BIT(13) #define G2_REG_INTERRUPT_DEC_RDY_INT BIT(12) +#define G2_REG_INTERRUPT_DEC_ABORT_INT BIT(11) +#define G2_REG_INTERRUPT_DEC_IRQ BIT(8) #define G2_REG_INTERRUPT_DEC_ABORT_E BIT(5) #define G2_REG_INTERRUPT_DEC_IRQ_DIS BIT(4) #define G2_REG_INTERRUPT_DEC_E BIT(0) @@ -35,6 +42,9 @@ #define BUS_WIDTH_128 2 #define BUS_WIDTH_256 3
+#define g2_dec_int_stat G2_DEC_REG(1, 11, 0xf) +#define g2_dec_irq G2_DEC_REG(1, 8, 0x1) + #define g2_strm_swap G2_DEC_REG(2, 28, 0xf) #define g2_strm_swap_old G2_DEC_REG(2, 27, 0x1f) #define g2_pic_swap G2_DEC_REG(2, 22, 0x1f) @@ -225,6 +235,9 @@ #define vp9_filt_level_seg5 G2_DEC_REG(19, 8, 0x3f) #define vp9_quant_seg5 G2_DEC_REG(19, 0, 0xff)
+#define g2_timemout_override_e G2_DEC_REG(45, 31, 0x1) +#define g2_timemout_cycles G2_DEC_REG(45, 0, 0x7fffffff) + #define hevc_cur_poc_00 G2_DEC_REG(46, 24, 0xff) #define hevc_cur_poc_01 G2_DEC_REG(46, 16, 0xff) #define hevc_cur_poc_02 G2_DEC_REG(46, 8, 0xff) --- a/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +++ b/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c @@ -893,8 +893,6 @@ int hantro_g2_vp9_dec_run(struct hantro_ struct vb2_v4l2_buffer *dst; int ret;
- hantro_g2_check_idle(ctx->dev); - ret = start_prepare_run(ctx, &decode_params); if (ret) { hantro_end_prepare_run(ctx); --- a/drivers/media/platform/verisilicon/hantro_hw.h +++ b/drivers/media/platform/verisilicon/hantro_hw.h @@ -541,6 +541,7 @@ void hantro_g2_vp9_dec_done(struct hantr int hantro_vp9_dec_init(struct hantro_ctx *ctx); void hantro_vp9_dec_exit(struct hantro_ctx *ctx); void hantro_g2_check_idle(struct hantro_dev *vpu); +void hantro_g2_reset(struct hantro_ctx *ctx); irqreturn_t hantro_g2_irq(int irq, void *dev_id);
#endif /* HANTRO_HW_H_ */ --- a/drivers/media/platform/verisilicon/imx8m_vpu_hw.c +++ b/drivers/media/platform/verisilicon/imx8m_vpu_hw.c @@ -312,11 +312,13 @@ static const struct hantro_codec_ops imx static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { [HANTRO_MODE_HEVC_DEC] = { .run = hantro_g2_hevc_dec_run, + .reset = hantro_g2_reset, .init = hantro_hevc_dec_init, .exit = hantro_hevc_dec_exit, }, [HANTRO_MODE_VP9_DEC] = { .run = hantro_g2_vp9_dec_run, + .reset = hantro_g2_reset, .done = hantro_g2_vp9_dec_done, .init = hantro_vp9_dec_init, .exit = hantro_vp9_dec_exit,