From: Anson Huang anson.huang@nxp.com
commit 93385546ba369182220436f60ceb3beabe4b7de1 upstream.
On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and sw2 supplies vdd3p0 LDO, this patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:
vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy
With this patch, the power supply is more accurate:
vdd1p1: supplied by VGEN5 vdd3p0: supplied by SW2 vdd2p5: supplied by VGEN5
Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 12 ++++++++++++ arch/arm/boot/dts/imx6qdl.dtsi | 6 +++--- 2 files changed, 15 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -671,6 +671,18 @@ vin-supply = <&sw1c_reg>; };
+®_vdd1p1 { + vin-supply = <&vgen5_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen5_reg>; +}; + &snvs_poweroff { status = "okay"; }; --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -686,7 +686,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -701,7 +701,7 @@ anatop-enable-bit = <0>; };
- regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -716,7 +716,7 @@ anatop-enable-bit = <0>; };
- regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>;