The dep->interval captures the number of frames/microframes per interval from bInterval. Fullspeed interrupt endpoint bInterval is the number of frames per interval and not 2^(bInterval - 1). So fix it here. This change is only for debugging purpose and should not affect the interrupt endpoint operation.
Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com --- drivers/usb/dwc3/gadget.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d0f8d3ec855f..aebcf8ec0716 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -615,8 +615,13 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) if (dwc->gadget->speed == USB_SPEED_FULL) bInterval_m1 = 0;
+ if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + dwc->gadget->speed == USB_SPEED_FULL) + dep->interval = desc->bInterval; + else + dep->interval = 1 << (desc->bInterval - 1); + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); - dep->interval = 1 << (desc->bInterval - 1); }
return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms);