The expected on-wire format of an SMBus Block Write is
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
Everything starting from the Count byte is provided by the I2C subsystem in the array data->block. But the driver was skipping the Count byte (data->block[0]) when sending it to the RTL93xx I2C controller.
Only the actual data could be seen on the wire:
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
This wire format is not SMBus Block Write compatible but matches the format of an I2C Block Write. Simply adding the count byte to the buffer for the I2C controller is enough to fix the transmission.
This also affects read because the I2C controller must receive the count byte + $count * data bytes.
Cc: stable@vger.kernel.org Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller") Signed-off-by: Sven Eckelmann sven@narfation.org Reviewed-by: Chris Packham chris.packham@alliedtelesis.co.nz Tested-by: Chris Packham chris.packham@alliedtelesis.co.nz --- drivers/i2c/busses/i2c-rtl9300.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c index 4a282d57e2c1a72c95bdabdd9eb348a73df28c44..cfafe089102aa208dde37096d5105d4140278ca9 100644 --- a/drivers/i2c/busses/i2c-rtl9300.c +++ b/drivers/i2c/busses/i2c-rtl9300.c @@ -285,15 +285,15 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s ret = -EINVAL; goto out_unlock; } - ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0]); + ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0] + 1); if (ret) goto out_unlock; if (read_write == I2C_SMBUS_WRITE) { - ret = rtl9300_i2c_write(i2c, &data->block[1], data->block[0]); + ret = rtl9300_i2c_write(i2c, &data->block[0], data->block[0] + 1); if (ret) goto out_unlock; } - len = data->block[0]; + len = data->block[0] + 1; break;
default: