6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Dybcio konrad.dybcio@linaro.org
[ Upstream commit c2596b717e9d96ae57c45481acfbafe9d3d54e56 ]
The dwc3 subnode was indented using spaces for some reason and other properties were not exactly properly indented. Fix it.
Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20230102094642.74254-3-konrad.dybcio@linaro.org Stable-dep-of: 5c0dbe8b0584 ("arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 44 +++++++++++++-------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 43a948b64007..1533c61cb106 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -201,8 +201,8 @@ crypto: crypto@73a000 { compatible = "qcom,crypto-v5.1"; reg = <0x0 0x0073a000 0x0 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, - <&gcc GCC_CRYPTO_AXI_CLK>, - <&gcc GCC_CRYPTO_CLK>; + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 2>, <&cryptobam 3>; dma-names = "rx", "tx"; @@ -272,7 +272,7 @@ blsp1_uart3: serial@78b1000 { reg = <0x0 0x078b1000 0x0 0x200>; interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; @@ -285,7 +285,7 @@ blsp1_spi1: spi@78b5000 { interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; @@ -300,7 +300,7 @@ blsp1_spi2: spi@78b6000 { interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; @@ -358,8 +358,8 @@ qpic_nand: nand@79b0000 { clock-names = "core", "aon";
dmas = <&qpic_bam 0>, - <&qpic_bam 1>, - <&qpic_bam 2>; + <&qpic_bam 1>, + <&qpic_bam 2>; dma-names = "tx", "rx", "cmd"; pinctrl-0 = <&qpic_pins>; pinctrl-names = "default"; @@ -372,10 +372,10 @@ intc: interrupt-controller@b000000 { #size-cells = <2>; interrupt-controller; #interrupt-cells = <0x3>; - reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ - <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ - <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ - <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ + reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ + <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ + <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ + <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; ranges = <0 0 0 0xb00a000 0 0xffd>;
@@ -669,17 +669,17 @@ usb2: usb@70f8800 { status = "disabled";
dwc_1: usb@7000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x07000000 0x0 0xcd00>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_1>; - phy-names = "usb2-phy"; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - dr_mode = "host"; + compatible = "snps,dwc3"; + reg = <0x0 0x07000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; }; };