6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com
[ Upstream commit caf2ae486742f6a93ca676bbebdfacfd34e4966d ]
For the eDP case we can support using aux-bus on MediaTek DP: this gives us the possibility to declare our panel as generic "panel-edp" which will automatically configure the timings and available modes via the EDID that we read from it.
To do this, move the panel parsing at the end of the probe function so that the hardware is initialized beforehand and also initialize the DPTX AUX block and power both on as, when we populate the aux-bus, the panel driver will trigger an EDID read to perform panel detection.
Last but not least, since now the AUX transfers can happen in the separated aux-bus, it was necessary to add an exclusion for the cable_plugged_in check in `mtk_dp_aux_transfer()` and the easiest way to do this is to simply ignore checking that when the bridge type is eDP.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Tested-by: Chen-Yu Tsai wenst@chromium.org Reviewed-by: Alexandre Mergnat amergnat@baylibre.com Reviewed-by: CK Hu ck.hu@mediatek.com Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-10... Signed-off-by: Chun-Kuang Hu chunkuang.hu@kernel.org Stable-dep-of: 8431fff9e0f3 ("drm/mediatek: dp: Fix mtk_dp_aux_transfer return value") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/mediatek/Kconfig | 1 + drivers/gpu/drm/mediatek/mtk_dp.c | 92 ++++++++++++++++++++++++++----- 2 files changed, 79 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 369e495d0c3e8..d1eededee9434 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -27,6 +27,7 @@ config DRM_MEDIATEK_DP select PHY_MTK_DP select DRM_DISPLAY_HELPER select DRM_DISPLAY_DP_HELPER + select DRM_DP_AUX_BUS help DRM/KMS Display Port driver for MediaTek SoCs.
diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c index 326a536e677cd..4bea46ae4dbfb 100644 --- a/drivers/gpu/drm/mediatek/mtk_dp.c +++ b/drivers/gpu/drm/mediatek/mtk_dp.c @@ -4,6 +4,7 @@ * Copyright (c) 2022 BayLibre */
+#include <drm/display/drm_dp_aux_bus.h> #include <drm/display/drm_dp.h> #include <drm/display/drm_dp_helper.h> #include <drm/drm_atomic_helper.h> @@ -1284,9 +1285,11 @@ static void mtk_dp_power_disable(struct mtk_dp *mtk_dp)
static void mtk_dp_initialize_priv_data(struct mtk_dp *mtk_dp) { + bool plugged_in = (mtk_dp->bridge.type == DRM_MODE_CONNECTOR_eDP); + mtk_dp->train_info.link_rate = DP_LINK_BW_5_4; mtk_dp->train_info.lane_count = mtk_dp->max_lanes; - mtk_dp->train_info.cable_plugged_in = false; + mtk_dp->train_info.cable_plugged_in = plugged_in;
mtk_dp->info.format = DP_PIXELFORMAT_RGB; memset(&mtk_dp->info.vm, 0, sizeof(struct videomode)); @@ -1588,6 +1591,16 @@ static int mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp) u8 val; ssize_t ret;
+ /* + * If we're eDP and capabilities were already parsed we can skip + * reading again because eDP panels aren't hotpluggable hence the + * caps and training information won't ever change in a boot life + */ + if (mtk_dp->bridge.type == DRM_MODE_CONNECTOR_eDP && + mtk_dp->rx_cap[DP_MAX_LINK_RATE] && + mtk_dp->train_info.sink_ssc) + return 0; + ret = drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); if (ret < 0) return ret; @@ -2037,15 +2050,14 @@ static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux, struct drm_dp_aux_msg *msg) { - struct mtk_dp *mtk_dp; + struct mtk_dp *mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); bool is_read; u8 request; size_t accessed_bytes = 0; int ret;
- mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); - - if (!mtk_dp->train_info.cable_plugged_in) { + if (mtk_dp->bridge.type != DRM_MODE_CONNECTOR_eDP && + !mtk_dp->train_info.cable_plugged_in) { ret = -EAGAIN; goto err; } @@ -2513,6 +2525,28 @@ static int mtk_dp_register_phy(struct mtk_dp *mtk_dp) return 0; }
+static int mtk_dp_edp_link_panel(struct drm_dp_aux *mtk_aux) +{ + struct mtk_dp *mtk_dp = container_of(mtk_aux, struct mtk_dp, aux); + struct device *dev = mtk_aux->dev; + int ret; + + mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); + + /* Power off the DP and AUX: either detection is done, or no panel present */ + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL, + DP_PWR_STATE_MASK); + mtk_dp_power_disable(mtk_dp); + + if (IS_ERR(mtk_dp->next_bridge)) { + ret = PTR_ERR(mtk_dp->next_bridge); + mtk_dp->next_bridge = NULL; + return ret; + } + return 0; +} + static int mtk_dp_probe(struct platform_device *pdev) { struct mtk_dp *mtk_dp; @@ -2531,21 +2565,14 @@ static int mtk_dp_probe(struct platform_device *pdev) return dev_err_probe(dev, irq_num, "failed to request dp irq resource\n");
- mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); - if (IS_ERR(mtk_dp->next_bridge) && - PTR_ERR(mtk_dp->next_bridge) == -ENODEV) - mtk_dp->next_bridge = NULL; - else if (IS_ERR(mtk_dp->next_bridge)) - return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge), - "Failed to get bridge\n"); - ret = mtk_dp_dt_parse(mtk_dp, pdev); if (ret) return dev_err_probe(dev, ret, "Failed to parse dt\n");
- drm_dp_aux_init(&mtk_dp->aux); mtk_dp->aux.name = "aux_mtk_dp"; + mtk_dp->aux.dev = dev; mtk_dp->aux.transfer = mtk_dp_aux_transfer; + drm_dp_aux_init(&mtk_dp->aux);
spin_lock_init(&mtk_dp->irq_thread_lock);
@@ -2586,6 +2613,43 @@ static int mtk_dp_probe(struct platform_device *pdev) mtk_dp->need_debounce = true; timer_setup(&mtk_dp->debounce_timer, mtk_dp_debounce_timer, 0);
+ if (mtk_dp->bridge.type == DRM_MODE_CONNECTOR_eDP) { + /* + * Set the data lanes to idle in case the bootloader didn't + * properly close the eDP port to avoid stalls and then + * reinitialize, reset and power on the AUX block. + */ + mtk_dp_set_idle_pattern(mtk_dp, true); + mtk_dp_initialize_aux_settings(mtk_dp); + mtk_dp_power_enable(mtk_dp); + + /* + * Power on the AUX to allow reading the EDID from aux-bus: + * please note that it is necessary to call power off in the + * .done_probing() callback (mtk_dp_edp_link_panel), as only + * there we can safely assume that we finished reading EDID. + */ + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL_LANE, + DP_PWR_STATE_MASK); + + ret = devm_of_dp_aux_populate_bus(&mtk_dp->aux, mtk_dp_edp_link_panel); + if (ret) { + /* -ENODEV this means that the panel is not on the aux-bus */ + if (ret == -ENODEV) { + ret = mtk_dp_edp_link_panel(&mtk_dp->aux); + if (ret) + return ret; + } else { + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL, + DP_PWR_STATE_MASK); + mtk_dp_power_disable(mtk_dp); + return ret; + } + } + } + pm_runtime_enable(dev); pm_runtime_get_sync(dev);