The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7444a8092906ed44c09459780c56ba57043e39b1 Mon Sep 17 00:00:00 2001
From: Daniel Mack daniel@zonque.org Date: Wed, 27 Jun 2018 20:58:45 +0200 Subject: [PATCH] libertas: fix suspend and resume for SDIO connected cards
Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus"), the MMC core used to call into the power management functions of SDIO clients itself and removed the card if the return code was non-zero. IOW, the mmc handled errors gracefully and didn't upchain them to the pm core.
Since this change, the mmc core relies on generic power management functions which treat all errors as a reason to cancel the suspend immediately. This causes suspend attempts to fail when the libertas driver is loaded.
To fix this, power down the card explicitly in if_sdio_suspend() when we know we're about to lose power and return success. Also set a flag in these cases, and power up the card again in if_sdio_resume().
Fixes: 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus") Cc: stable@vger.kernel.org Signed-off-by: Daniel Mack daniel@zonque.org Reviewed-by: Chris Ball chris@printf.net Reviewed-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Kalle Valo kvalo@codeaurora.org
diff --git a/drivers/net/wireless/marvell/libertas/dev.h b/drivers/net/wireless/marvell/libertas/dev.h index dd1ee1f0af48..469134930026 100644 --- a/drivers/net/wireless/marvell/libertas/dev.h +++ b/drivers/net/wireless/marvell/libertas/dev.h @@ -104,6 +104,7 @@ struct lbs_private { u8 fw_ready; u8 surpriseremoved; u8 setup_fw_on_resume; + u8 power_up_on_resume; int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb); void (*reset_card) (struct lbs_private *priv); int (*power_save) (struct lbs_private *priv); diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c index 2300e796c6ab..43743c26c071 100644 --- a/drivers/net/wireless/marvell/libertas/if_sdio.c +++ b/drivers/net/wireless/marvell/libertas/if_sdio.c @@ -1290,15 +1290,23 @@ static void if_sdio_remove(struct sdio_func *func) static int if_sdio_suspend(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); - int ret; struct if_sdio_card *card = sdio_get_drvdata(func); + struct lbs_private *priv = card->priv; + int ret;
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func); + priv->power_up_on_resume = false;
/* If we're powered off anyway, just let the mmc layer remove the * card. */ - if (!lbs_iface_active(card->priv)) - return -ENOSYS; + if (!lbs_iface_active(priv)) { + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; + }
dev_info(dev, "%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags); @@ -1306,9 +1314,14 @@ static int if_sdio_suspend(struct device *dev) /* If we aren't being asked to wake on anything, we should bail out * and let the SD stack power down the card. */ - if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) { + if (priv->wol_criteria == EHS_REMOVE_WAKEUP) { dev_info(dev, "Suspend without wake params -- powering down card\n"); - return -ENOSYS; + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; }
if (!(flags & MMC_PM_KEEP_POWER)) { @@ -1321,7 +1334,7 @@ static int if_sdio_suspend(struct device *dev) if (ret) return ret;
- ret = lbs_suspend(card->priv); + ret = lbs_suspend(priv); if (ret) return ret;
@@ -1336,6 +1349,11 @@ static int if_sdio_resume(struct device *dev)
dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
+ if (card->priv->power_up_on_resume) { + if_sdio_power_on(card); + wait_event(card->pwron_waitq, card->priv->fw_ready); + } + ret = lbs_resume(card->priv);
return ret;