6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lino Sanfilippo l.sanfilippo@kunbus.com
commit f418ae73311deb901c0110b08d1bbafc20c1820e upstream.
Before commit 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the rx-during-tx mode was not controlled by a GPIO. Now the flag is set unconditionally when RS485 is enabled. This results in an incorrect setting if the rx-during-tx GPIO is not asserted.
Fix this by setting the flag only if the rx-during-tx mode is not controlled by a GPIO and thus restore the correct behaviour.
Cc: stable@vger.kernel.org # 6.6+ Fixes: 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com Link: https://lore.kernel.org/r/20240216224709.9928-1-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/stm32-usart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -251,7 +251,9 @@ static int stm32_usart_config_rs485(stru writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1);
- rs485conf->flags |= SER_RS485_RX_DURING_TX; + if (!port->rs485_rx_during_tx_gpio) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP);