From: Sean V Kelley sean.v.kelley@linux.intel.com
commit b88bf6c3b6ff77948c153cac4e564642b0b90632 upstream.
The following was observed by Kar Hin Ong with RT patchset:
Backtrace: irq 19: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 3329 Comm: irq/34-nipalk Tainted:4.14.87-rt49 #1 Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020 Call Trace: <IRQ> ? dump_stack+0x46/0x5e ? __report_bad_irq+0x2e/0xb0 ? note_interrupt+0x242/0x290 ? nNIKAL100_memoryRead16+0x8/0x10 [nikal] ? handle_irq_event_percpu+0x55/0x70 ? handle_irq_event+0x4f/0x80 ? handle_fasteoi_irq+0x81/0x180 ? handle_irq+0x1c/0x30 ? do_IRQ+0x41/0xd0 ? common_interrupt+0x84/0x84 </IRQ> ... handlers: [<ffffffffb3297200>] irq_default_primary_handler threaded [<ffffffffb3669180>] usb_hcd_irq Disabling IRQ #19
The problem being that this device is triggering boot interrupts due to threaded interrupt handling and masking of the IO-APIC. These boot interrupts are then forwarded on to the legacy PCH's PIRQ lines where there is no handler present for the device.
Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2 (GSI 44), the kernel receives two interrupts:
1. Interrupt from Pin 20 of IOAPIC 2 -> Expected 2. Interrupt from Pin 19 of IOAPIC 1 -> UNEXPECTED
Quirks for disabling boot interrupts (preferred) or rerouting the handler exist but do not address these Xeon chipsets' mechanism: https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/
Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC register's dis_intx_rout2ich bit.
Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.c... Reported-by: Kar Hin Ong kar.hin.ong@ni.com Tested-by: Kar Hin Ong kar.hin.ong@ni.com Signed-off-by: Sean V Kelley sean.v.kelley@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/pci/quirks.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 73 insertions(+), 7 deletions(-)
--- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1970,26 +1970,92 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I /* * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no * 300641-004US, section 5.7.3. + * + * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003. + * Core IO on Xeon E5 v2, see Intel order no 329188-003. + * Core IO on Xeon E7 v2, see Intel order no 329595-002. + * Core IO on Xeon E5 v3, see Intel order no 330784-003. + * Core IO on Xeon E7 v3, see Intel order no 332315-001US. + * Core IO on Xeon E5 v4, see Intel order no 333810-002US. + * Core IO on Xeon E7 v4, see Intel order no 332315-001US. + * Core IO on Xeon D-1500, see Intel order no 332051-001. + * Core IO on Xeon Scalable, see Intel order no 610950. */ -#define INTEL_6300_IOAPIC_ABAR 0x40 +#define INTEL_6300_IOAPIC_ABAR 0x40 /* Bus 0, Dev 29, Func 5 */ #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
+#define INTEL_CIPINTRC_CFG_OFFSET 0x14C /* Bus 0, Dev 5, Func 0 */ +#define INTEL_CIPINTRC_DIS_INTX_ICH (1<<25) + static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) { u16 pci_config_word; + u32 pci_config_dword;
if (noioapicquirk) return;
- pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); - pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; - pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); - + switch (dev->device) { + case PCI_DEVICE_ID_INTEL_ESB_10: + pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, + &pci_config_word); + pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; + pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, + pci_config_word); + break; + case 0x3c28: /* Xeon E5 1600/2600/4600 */ + case 0x0e28: /* Xeon E5/E7 V2 */ + case 0x2f28: /* Xeon E5/E7 V3,V4 */ + case 0x6f28: /* Xeon D-1500 */ + case 0x2034: /* Xeon Scalable Family */ + pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, + &pci_config_dword); + pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH; + pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, + pci_config_dword); + break; + default: + return; + } pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", dev->vendor, dev->device); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); +/* + * Device 29 Func 5 Device IDs of IO-APIC + * containing ABAR—APIC1 Alternate Base Address Register + */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, + quirk_disable_intel_boot_interrupt); + +/* + * Device 5 Func 0 Device IDs of Core IO modules/hubs + * containing Coherent Interface Protocol Interrupt Control + * + * Device IDs obtained from volume 2 datasheets of commented + * families above. + */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x3c28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0e28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2f28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x6f28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2034, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x3c28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x0e28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2f28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x6f28, + quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2034, + quirk_disable_intel_boot_interrupt);
/* Disable boot interrupts on HT-1000 */ #define BC_HT1000_FEATURE_REG 0x64