Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause a null derefence in tpm_buf_append_name(). Thus, address !chip->auth in tpm_buf_append_name() and remove the fallback implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+ Reported-by: Stefan Berger stefanb@linux.ibm.com Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@lin... Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append") Signed-off-by: Jarkko Sakkinen jarkko@kernel.org --- v3: * Address: https://lore.kernel.org/linux-integrity/922603265d61011dbb23f18a04525ae973b8... v2: * N/A --- drivers/char/tpm/Makefile | 2 +- drivers/char/tpm/tpm2-sessions.c | 217 +++++++++++++++++-------------- include/linux/tpm.h | 14 +- 3 files changed, 121 insertions(+), 112 deletions(-)
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile index 4c695b0388f3..9bb142c75243 100644 --- a/drivers/char/tpm/Makefile +++ b/drivers/char/tpm/Makefile @@ -16,8 +16,8 @@ tpm-y += eventlog/common.o tpm-y += eventlog/tpm1.o tpm-y += eventlog/tpm2.o tpm-y += tpm-buf.o +tpm-y += tpm2-sessions.o
-tpm-$(CONFIG_TCG_TPM2_HMAC) += tpm2-sessions.o tpm-$(CONFIG_ACPI) += tpm_ppi.o eventlog/acpi.o tpm-$(CONFIG_EFI) += eventlog/efi.o tpm-$(CONFIG_OF) += eventlog/of.o diff --git a/drivers/char/tpm/tpm2-sessions.c b/drivers/char/tpm/tpm2-sessions.c index 2f1d96a5a5a7..179bcaac06ce 100644 --- a/drivers/char/tpm/tpm2-sessions.c +++ b/drivers/char/tpm/tpm2-sessions.c @@ -83,9 +83,6 @@ #define AES_KEY_BYTES AES_KEYSIZE_128 #define AES_KEY_BITS (AES_KEY_BYTES*8)
-static int tpm2_create_primary(struct tpm_chip *chip, u32 hierarchy, - u32 *handle, u8 *name); - /* * This is the structure that carries all the auth information (like * session handle, nonces, session key and auth) from use to use it is @@ -148,6 +145,7 @@ struct tpm2_auth { u8 name[AUTH_MAX_NAMES][2 + SHA512_DIGEST_SIZE]; };
+#ifdef CONFIG_TCG_TPM2_HMAC /* * Name Size based on TPM algorithm (assumes no hash bigger than 255) */ @@ -163,6 +161,120 @@ static u8 name_size(const u8 *name) return size_map[alg] + 2; }
+static int tpm2_parse_read_public(char *name, struct tpm_buf *buf) +{ + struct tpm_header *head = (struct tpm_header *)buf->data; + off_t offset = TPM_HEADER_SIZE; + u32 tot_len = be32_to_cpu(head->length); + u32 val; + + /* we're starting after the header so adjust the length */ + tot_len -= TPM_HEADER_SIZE; + + /* skip public */ + val = tpm_buf_read_u16(buf, &offset); + if (val > tot_len) + return -EINVAL; + offset += val; + /* name */ + val = tpm_buf_read_u16(buf, &offset); + if (val != name_size(&buf->data[offset])) + return -EINVAL; + memcpy(name, &buf->data[offset], val); + /* forget the rest */ + return 0; +} + +static int tpm2_read_public(struct tpm_chip *chip, u32 handle, char *name) +{ + struct tpm_buf buf; + int rc; + + rc = tpm_buf_init(&buf, TPM2_ST_NO_SESSIONS, TPM2_CC_READ_PUBLIC); + if (rc) + return rc; + + tpm_buf_append_u32(&buf, handle); + rc = tpm_transmit_cmd(chip, &buf, 0, "read public"); + if (rc == TPM2_RC_SUCCESS) + rc = tpm2_parse_read_public(name, &buf); + + tpm_buf_destroy(&buf); + + return rc; +} +#endif /* CONFIG_TCG_TPM2_HMAC */ + +/** + * tpm_buf_append_name() - add a handle area to the buffer + * @chip: the TPM chip structure + * @buf: The buffer to be appended + * @handle: The handle to be appended + * @name: The name of the handle (may be NULL) + * + * In order to compute session HMACs, we need to know the names of the + * objects pointed to by the handles. For most objects, this is simply + * the actual 4 byte handle or an empty buf (in these cases @name + * should be NULL) but for volatile objects, permanent objects and NV + * areas, the name is defined as the hash (according to the name + * algorithm which should be set to sha256) of the public area to + * which the two byte algorithm id has been appended. For these + * objects, the @name pointer should point to this. If a name is + * required but @name is NULL, then TPM2_ReadPublic() will be called + * on the handle to obtain the name. + * + * As with most tpm_buf operations, success is assumed because failure + * will be caused by an incorrect programming model and indicated by a + * kernel message. + */ +void tpm_buf_append_name(struct tpm_chip *chip, struct tpm_buf *buf, + u32 handle, u8 *name) +{ + enum tpm2_mso_type __maybe_unused mso = tpm2_handle_mso(handle); + struct tpm2_auth __maybe_unused *auth; + int __maybe_unused slot; + + if (!__and(IS_ENABLED(CONFIG_TCG_TPM2_HMAC), chip->auth)) { + tpm_buf_append_u32(buf, handle); + /* count the number of handles in the upper bits of flags */ + buf->handles++; + return; + } + +#ifdef CONFIG_TCG_TPM2_HMAC + slot = (tpm_buf_length(buf) - TPM_HEADER_SIZE) / 4; + if (slot >= AUTH_MAX_NAMES) { + dev_err(&chip->dev, "TPM: too many handles\n"); + return; + } + auth = chip->auth; + WARN(auth->session != tpm_buf_length(buf), + "name added in wrong place\n"); + tpm_buf_append_u32(buf, handle); + auth->session += 4; + + if (mso == TPM2_MSO_PERSISTENT || + mso == TPM2_MSO_VOLATILE || + mso == TPM2_MSO_NVRAM) { + if (!name) + tpm2_read_public(chip, handle, auth->name[slot]); + } else { + if (name) + dev_err(&chip->dev, "TPM: Handle does not require name but one is specified\n"); + } + + auth->name_h[slot] = handle; + if (name) + memcpy(auth->name[slot], name, name_size(name)); +#endif /* CONFIG_TCG_TPM2_HMAC */ +} +EXPORT_SYMBOL_GPL(tpm_buf_append_name); + +#ifdef CONFIG_TCG_TPM2_HMAC + +static int tpm2_create_primary(struct tpm_chip *chip, u32 hierarchy, + u32 *handle, u8 *name); + /* * It turns out the crypto hmac(sha256) is hard for us to consume * because it assumes a fixed key and the TPM seems to change the key @@ -567,104 +679,6 @@ void tpm_buf_fill_hmac_session(struct tpm_chip *chip, struct tpm_buf *buf) } EXPORT_SYMBOL(tpm_buf_fill_hmac_session);
-static int tpm2_parse_read_public(char *name, struct tpm_buf *buf) -{ - struct tpm_header *head = (struct tpm_header *)buf->data; - off_t offset = TPM_HEADER_SIZE; - u32 tot_len = be32_to_cpu(head->length); - u32 val; - - /* we're starting after the header so adjust the length */ - tot_len -= TPM_HEADER_SIZE; - - /* skip public */ - val = tpm_buf_read_u16(buf, &offset); - if (val > tot_len) - return -EINVAL; - offset += val; - /* name */ - val = tpm_buf_read_u16(buf, &offset); - if (val != name_size(&buf->data[offset])) - return -EINVAL; - memcpy(name, &buf->data[offset], val); - /* forget the rest */ - return 0; -} - -static int tpm2_read_public(struct tpm_chip *chip, u32 handle, char *name) -{ - struct tpm_buf buf; - int rc; - - rc = tpm_buf_init(&buf, TPM2_ST_NO_SESSIONS, TPM2_CC_READ_PUBLIC); - if (rc) - return rc; - - tpm_buf_append_u32(&buf, handle); - rc = tpm_transmit_cmd(chip, &buf, 0, "read public"); - if (rc == TPM2_RC_SUCCESS) - rc = tpm2_parse_read_public(name, &buf); - - tpm_buf_destroy(&buf); - - return rc; -} - -/** - * tpm_buf_append_name() - add a handle area to the buffer - * @chip: the TPM chip structure - * @buf: The buffer to be appended - * @handle: The handle to be appended - * @name: The name of the handle (may be NULL) - * - * In order to compute session HMACs, we need to know the names of the - * objects pointed to by the handles. For most objects, this is simply - * the actual 4 byte handle or an empty buf (in these cases @name - * should be NULL) but for volatile objects, permanent objects and NV - * areas, the name is defined as the hash (according to the name - * algorithm which should be set to sha256) of the public area to - * which the two byte algorithm id has been appended. For these - * objects, the @name pointer should point to this. If a name is - * required but @name is NULL, then TPM2_ReadPublic() will be called - * on the handle to obtain the name. - * - * As with most tpm_buf operations, success is assumed because failure - * will be caused by an incorrect programming model and indicated by a - * kernel message. - */ -void tpm_buf_append_name(struct tpm_chip *chip, struct tpm_buf *buf, - u32 handle, u8 *name) -{ - enum tpm2_mso_type mso = tpm2_handle_mso(handle); - struct tpm2_auth *auth = chip->auth; - int slot; - - slot = (tpm_buf_length(buf) - TPM_HEADER_SIZE)/4; - if (slot >= AUTH_MAX_NAMES) { - dev_err(&chip->dev, "TPM: too many handles\n"); - return; - } - WARN(auth->session != tpm_buf_length(buf), - "name added in wrong place\n"); - tpm_buf_append_u32(buf, handle); - auth->session += 4; - - if (mso == TPM2_MSO_PERSISTENT || - mso == TPM2_MSO_VOLATILE || - mso == TPM2_MSO_NVRAM) { - if (!name) - tpm2_read_public(chip, handle, auth->name[slot]); - } else { - if (name) - dev_err(&chip->dev, "TPM: Handle does not require name but one is specified\n"); - } - - auth->name_h[slot] = handle; - if (name) - memcpy(auth->name[slot], name, name_size(name)); -} -EXPORT_SYMBOL(tpm_buf_append_name); - /** * tpm_buf_check_hmac_response() - check the TPM return HMAC for correctness * @chip: the TPM chip structure @@ -1311,3 +1325,4 @@ int tpm2_sessions_init(struct tpm_chip *chip)
return rc; } +#endif /* CONFIG_TCG_TPM2_HMAC */ diff --git a/include/linux/tpm.h b/include/linux/tpm.h index 21a67dc9efe8..d9a6991b247d 100644 --- a/include/linux/tpm.h +++ b/include/linux/tpm.h @@ -490,11 +490,13 @@ static inline void tpm_buf_append_empty_auth(struct tpm_buf *buf, u32 handle) { } #endif -#ifdef CONFIG_TCG_TPM2_HMAC
-int tpm2_start_auth_session(struct tpm_chip *chip); void tpm_buf_append_name(struct tpm_chip *chip, struct tpm_buf *buf, u32 handle, u8 *name); + +#ifdef CONFIG_TCG_TPM2_HMAC + +int tpm2_start_auth_session(struct tpm_chip *chip); void tpm_buf_append_hmac_session(struct tpm_chip *chip, struct tpm_buf *buf, u8 attributes, u8 *passphrase, int passphraselen); @@ -521,14 +523,6 @@ static inline int tpm2_start_auth_session(struct tpm_chip *chip) static inline void tpm2_end_auth_session(struct tpm_chip *chip) { } -static inline void tpm_buf_append_name(struct tpm_chip *chip, - struct tpm_buf *buf, - u32 handle, u8 *name) -{ - tpm_buf_append_u32(buf, handle); - /* count the number of handles in the upper bits of flags */ - buf->handles++; -} static inline void tpm_buf_append_hmac_session(struct tpm_chip *chip, struct tpm_buf *buf, u8 attributes, u8 *passphrase,