From: Vinod Polimera quic_vpolimer@quicinc.com
[ Upstream commit e3969eadc8ee78a5bdca65b8ed0a421a359e4090 ]
Recommended way of reading the interface timing gen status is via status register. Timing gen status register will give a reliable status of the interface especially during ON/OFF transitions. This support was added from DPU version 5.0.0.
Signed-off-by: Vinod Polimera quic_vpolimer@quicinc.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/524724/ Link: https://lore.kernel.org/r/1677774797-31063-6-git-send-email-quic_vpolimer@qu... Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Stable-dep-of: a7129231edf3 ("drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 ++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 12 +++++++----- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 8 +++++++- 3 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 4c65259eecb9d..70d14b0db50fa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -53,7 +53,8 @@
#define INTF_SDM845_MASK (0)
-#define INTF_SC7180_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) +#define INTF_SC7180_MASK \ + (BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) | BIT(DPU_INTF_STATUS_SUPPORTED))
#define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index d2a945a27cfaa..321b7599fe2d0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -191,17 +191,19 @@ enum {
/** * INTF sub-blocks - * @DPU_INTF_INPUT_CTRL Supports the setting of pp block from which - * pixel data arrives to this INTF - * @DPU_INTF_TE INTF block has TE configuration support - * @DPU_DATA_HCTL_EN Allows data to be transferred at different rate - than video timing + * @DPU_INTF_INPUT_CTRL Supports the setting of pp block from which + * pixel data arrives to this INTF + * @DPU_INTF_TE INTF block has TE configuration support + * @DPU_DATA_HCTL_EN Allows data to be transferred at different rate + * than video timing + * @DPU_INTF_STATUS_SUPPORTED INTF block has INTF_STATUS register * @DPU_INTF_MAX */ enum { DPU_INTF_INPUT_CTRL = 0x1, DPU_INTF_TE, DPU_DATA_HCTL_EN, + DPU_INTF_STATUS_SUPPORTED, DPU_INTF_MAX };
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c index 916e2a4756c09..7c09d30a62b8d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c @@ -54,6 +54,7 @@ #define INTF_PROG_FETCH_START 0x170 #define INTF_PROG_ROT_START 0x174 #define INTF_MUX 0x25C +#define INTF_STATUS 0x26C
static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf, const struct dpu_mdss_cfg *m, @@ -259,8 +260,13 @@ static void dpu_hw_intf_get_status( struct intf_status *s) { struct dpu_hw_blk_reg_map *c = &intf->hw; + unsigned long cap = intf->cap->features; + + if (cap & BIT(DPU_INTF_STATUS_SUPPORTED)) + s->is_en = DPU_REG_READ(c, INTF_STATUS) & BIT(0); + else + s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
- s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN); s->is_prog_fetch_en = !!(DPU_REG_READ(c, INTF_CONFIG) & BIT(31)); if (s->is_en) { s->frame_count = DPU_REG_READ(c, INTF_FRAME_COUNT);