6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Devarsh Thakkar devarsht@ti.com
commit 361a2ebb5cad211732ec3c5d962de49b21895590 upstream.
The driver does not touch the irqstatus register when it is disabling interrupts. This might cause an interrupt to trigger for an interrupt that was just disabled.
To fix the issue, clear the irqstatus registers right after disabling the interrupts.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Reported-by: Jonathan Cormier jcormier@criticallink.com Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/13... Signed-off-by: Devarsh Thakkar devarsht@ti.com [Tomi: mostly rewrote the patch] Reviewed-by: Jonathan Cormier jcormier@criticallink.com Tested-by: Jonathan Cormier jcormier@criticallink.com Reviewed-by: Aradhya Bhatia aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-5-82... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/tidss/tidss_dispc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -700,7 +700,7 @@ void dispc_k2g_set_irqenable(struct disp { dispc_irq_t old_mask = dispc_k2g_read_irqenable(dispc);
- /* clear the irqstatus for newly enabled irqs */ + /* clear the irqstatus for irqs that will be enabled */ dispc_k2g_clear_irqstatus(dispc, (mask ^ old_mask) & mask);
dispc_k2g_vp_set_irqenable(dispc, 0, mask); @@ -708,6 +708,9 @@ void dispc_k2g_set_irqenable(struct disp
dispc_write(dispc, DISPC_IRQENABLE_SET, (1 << 0) | (1 << 7));
+ /* clear the irqstatus for irqs that were disabled */ + dispc_k2g_clear_irqstatus(dispc, (mask ^ old_mask) & old_mask); + /* flush posted write */ dispc_k2g_read_irqenable(dispc); } @@ -839,7 +842,7 @@ static void dispc_k3_set_irqenable(struc
old_mask = dispc_k3_read_irqenable(dispc);
- /* clear the irqstatus for newly enabled irqs */ + /* clear the irqstatus for irqs that will be enabled */ dispc_k3_clear_irqstatus(dispc, (old_mask ^ mask) & mask);
for (i = 0; i < dispc->feat->num_vps; ++i) { @@ -864,6 +867,9 @@ static void dispc_k3_set_irqenable(struc if (main_disable) dispc_write(dispc, DISPC_IRQENABLE_CLR, main_disable);
+ /* clear the irqstatus for irqs that were disabled */ + dispc_k3_clear_irqstatus(dispc, (old_mask ^ mask) & old_mask); + /* Flush posted writes */ dispc_read(dispc, DISPC_IRQENABLE_SET); }