6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Puranjay Mohan puranjay@kernel.org
[ Upstream commit b599d7d26d6ad1fc9975218574bc2ca6d0293cfd ]
When a load is marked PROBE_MEM - e.g. due to PTR_UNTRUSTED access - the address being loaded from is not necessarily valid. The BPF jit sets up exception handlers for each such load which catch page faults and 0 out the destination register.
If the address for the load is outside kernel address space, the load will escape the exception handling and crash the kernel. To prevent this from happening, the emits some instruction to verify that addr is > end of userspace addresses.
x86 has a legacy vsyscall ABI where a page at address 0xffffffffff600000 is mapped with user accessible permissions. The addresses in this page are considered userspace addresses by the fault handler. Therefore, a BPF program accessing this page will crash the kernel.
This patch fixes the runtime checks to also check that the PROBE_MEM address is below VSYSCALL_ADDR.
Example BPF program:
SEC("fentry/tcp_v4_connect") int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk) { *(volatile unsigned long *)&sk->sk_tsq_flags; return 0; }
BPF Assembly:
0: (79) r1 = *(u64 *)(r1 +0) 1: (79) r1 = *(u64 *)(r1 +344) 2: (b7) r0 = 0 3: (95) exit
x86-64 JIT ==========
BEFORE AFTER ------ -----
0: nopl 0x0(%rax,%rax,1) 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 5: xchg %ax,%ax 7: push %rbp 7: push %rbp 8: mov %rsp,%rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rdi b: mov 0x0(%rdi),%rdi ------------------------------------------------------------------------------- f: movabs $0x100000000000000,%r11 f: movabs $0xffffffffff600000,%r10 19: add $0x2a0,%rdi 19: mov %rdi,%r11 20: cmp %r11,%rdi 1c: add $0x2a0,%r11 23: jae 0x0000000000000029 23: sub %r10,%r11 25: xor %edi,%edi 26: movabs $0x100000000a00000,%r10 27: jmp 0x000000000000002d 30: cmp %r10,%r11 29: mov 0x0(%rdi),%rdi 33: ja 0x0000000000000039 --------------------------------\ 35: xor %edi,%edi 2d: xor %eax,%eax \ 37: jmp 0x0000000000000040 2f: leave \ 39: mov 0x2a0(%rdi),%rdi 30: ret -------------------------------------------- 40: xor %eax,%eax 42: leave 43: ret
Signed-off-by: Puranjay Mohan puranjay@kernel.org Link: https://lore.kernel.org/r/20240424100210.11982-3-puranjay@kernel.org Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/net/bpf_jit_comp.c | 57 ++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 32 deletions(-)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index a6a4d3ca8ddc6..878a4c6dd7565 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1458,36 +1458,41 @@ st: if (is_imm8(insn->off)) if (BPF_MODE(insn->code) == BPF_PROBE_MEM || BPF_MODE(insn->code) == BPF_PROBE_MEMSX) { /* Conservatively check that src_reg + insn->off is a kernel address: - * src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE - * src_reg is used as scratch for src_reg += insn->off and restored - * after emit_ldx if necessary + * src_reg + insn->off > TASK_SIZE_MAX + PAGE_SIZE + * and + * src_reg + insn->off < VSYSCALL_ADDR */
- u64 limit = TASK_SIZE_MAX + PAGE_SIZE; + u64 limit = TASK_SIZE_MAX + PAGE_SIZE - VSYSCALL_ADDR; u8 *end_of_jmp;
- /* At end of these emitted checks, insn->off will have been added - * to src_reg, so no need to do relative load with insn->off offset - */ - insn_off = 0; + /* movabsq r10, VSYSCALL_ADDR */ + emit_mov_imm64(&prog, BPF_REG_AX, (long)VSYSCALL_ADDR >> 32, + (u32)(long)VSYSCALL_ADDR);
- /* movabsq r11, limit */ - EMIT2(add_1mod(0x48, AUX_REG), add_1reg(0xB8, AUX_REG)); - EMIT((u32)limit, 4); - EMIT(limit >> 32, 4); + /* mov src_reg, r11 */ + EMIT_mov(AUX_REG, src_reg);
if (insn->off) { - /* add src_reg, insn->off */ - maybe_emit_1mod(&prog, src_reg, true); - EMIT2_off32(0x81, add_1reg(0xC0, src_reg), insn->off); + /* add r11, insn->off */ + maybe_emit_1mod(&prog, AUX_REG, true); + EMIT2_off32(0x81, add_1reg(0xC0, AUX_REG), insn->off); }
- /* cmp src_reg, r11 */ - maybe_emit_mod(&prog, src_reg, AUX_REG, true); - EMIT2(0x39, add_2reg(0xC0, src_reg, AUX_REG)); + /* sub r11, r10 */ + maybe_emit_mod(&prog, AUX_REG, BPF_REG_AX, true); + EMIT2(0x29, add_2reg(0xC0, AUX_REG, BPF_REG_AX)); + + /* movabsq r10, limit */ + emit_mov_imm64(&prog, BPF_REG_AX, (long)limit >> 32, + (u32)(long)limit); + + /* cmp r10, r11 */ + maybe_emit_mod(&prog, AUX_REG, BPF_REG_AX, true); + EMIT2(0x39, add_2reg(0xC0, AUX_REG, BPF_REG_AX));
- /* if unsigned '>=', goto load */ - EMIT2(X86_JAE, 0); + /* if unsigned '>', goto load */ + EMIT2(X86_JA, 0); end_of_jmp = prog;
/* xor dst_reg, dst_reg */ @@ -1513,18 +1518,6 @@ st: if (is_imm8(insn->off)) /* populate jmp_offset for JMP above */ start_of_ldx[-1] = prog - start_of_ldx;
- if (insn->off && src_reg != dst_reg) { - /* sub src_reg, insn->off - * Restore src_reg after "add src_reg, insn->off" in prev - * if statement. But if src_reg == dst_reg, emit_ldx - * above already clobbered src_reg, so no need to restore. - * If add src_reg, insn->off was unnecessary, no need to - * restore either. - */ - maybe_emit_1mod(&prog, src_reg, true); - EMIT2_off32(0x81, add_1reg(0xE8, src_reg), insn->off); - } - if (!bpf_prog->aux->extable) break;