5.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Sverdlin alexander.sverdlin@siemens.com
[ Upstream commit fd779eac2d659668be4d3dbdac0710afd5d6db12 ]
Having setup time 0 violates tAR, tCLR of some chips, for instance TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of 98 dc 90 15 76 ...).
Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation [1], but it looks more appropriate to just calculate setup time properly.
[1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/Application...
Cc: stable@vger.kernel.org Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Signed-off-by: Alexander Sverdlin alexander.sverdlin@siemens.com Tested-by: Alexander Dahl ada@thorsis.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/raw/atmel/nand-controller.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1312,13 +1312,23 @@ static int atmel_smc_nand_prepare_smccon return ret;
/* + * Read setup timing depends on the operation done on the NAND: + * + * NRD_SETUP = max(tAR, tCLR) + */ + timeps = max(conf->timings.sdr.tAR_min, conf->timings.sdr.tCLR_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); + if (ret) + return ret; + + /* * The read cycle timing is directly matching tRC, but is also * dependent on the setup and hold timings we calculated earlier, * which gives: * - * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) - * - * NRD_SETUP is always 0. + * NRD_CYCLE = max(tRC, NRD_SETUP + NRD_PULSE + NRD_HOLD) */ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); ncycles = max(totalcycles, ncycles);