From: Ben Hutchings ben.hutchings@mind.be
[ Upstream commit ef3b02a1d79b691f9a354c4903cf1e6917e315f9 ]
ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this:
* Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist.
* When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID.
* When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings ben.hutchings@mind.be Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/microchip/ksz8795.c | 26 ++++++++++++++++++------- drivers/net/dsa/microchip/ksz8795_reg.h | 4 ++++ 2 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index ad509a57a945..bc9ca2b0e091 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -1083,6 +1083,16 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag, return 0; }
+static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state) +{ + if (ksz_is_ksz88x3(dev)) { + ksz_cfg(dev, REG_SW_INSERT_SRC_PVID, + 0x03 << (4 - 2 * port), state); + } else { + ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00); + } +} + static int ksz8_port_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, struct netlink_ext_ack *extack) @@ -1119,9 +1129,11 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port, u16 vid;
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid); - vid &= 0xfff; + vid &= ~VLAN_VID_MASK; vid |= new_pvid; ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid); + + ksz8_port_enable_pvid(dev, port, true); }
return 0; @@ -1132,7 +1144,7 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port, { bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; struct ksz_device *dev = ds->priv; - u16 data, pvid, new_pvid = 0; + u16 data, pvid; u8 fid, member, valid;
if (ksz_is_ksz88x3(dev)) @@ -1154,14 +1166,11 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port, valid = 0; }
- if (pvid == vlan->vid) - new_pvid = 1; - ksz8_to_vlan(dev, fid, member, valid, &data); ksz8_w_vlan_table(dev, vlan->vid, data);
- if (new_pvid != pvid) - ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid); + if (pvid == vlan->vid) + ksz8_port_enable_pvid(dev, port, false);
return 0; } @@ -1394,6 +1403,9 @@ static int ksz8_setup(struct dsa_switch *ds)
ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+ if (!ksz_is_ksz88x3(dev)) + ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true); + /* set broadcast storm protection 10% rate */ regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL, BROADCAST_STORM_RATE, diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h index c2e52c40a54c..383ba7a90f9c 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -631,6 +631,10 @@ #define REG_PORT_4_OUT_RATE_3 0xEE #define REG_PORT_5_OUT_RATE_3 0xFE
+/* 88x3 specific */ + +#define REG_SW_INSERT_SRC_PVID 0xC2 + /* PME */
#define SW_PME_OUTPUT_ENABLE BIT(1)