6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King (Oracle) rmk+kernel@armlinux.org.uk
[ Upstream commit a18891b55703a45b700618ef40edd5e9aaecc345 ]
The static configuration reload saves the port speed in the static configuration tables by first converting it from the internal respresentation to the SPEED_xxx ethtool representation, and then converts it back to restore the setting. This is because sja1105_adjust_port_config() takes the speed as SPEED_xxx.
However, this is unnecessarily complex. If we split sja1105_adjust_port_config() up, we can simply save and restore the mac[port].speed member in the static configuration tables.
Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Link: https://patch.msgid.link/E1svfMa-005ZIX-If@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: da62abaaa268 ("net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/sja1105/sja1105_main.c | 65 ++++++++++++++------------ 1 file changed, 34 insertions(+), 31 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index fbac2a647b20b..f3bb49a9e63c0 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1257,29 +1257,11 @@ static int sja1105_parse_dt(struct sja1105_private *priv) return rc; }
-/* Convert link speed from SJA1105 to ethtool encoding */ -static int sja1105_port_speed_to_ethtool(struct sja1105_private *priv, - u64 speed) -{ - if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) - return SPEED_10; - if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) - return SPEED_100; - if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) - return SPEED_1000; - if (speed == priv->info->port_speed[SJA1105_SPEED_2500MBPS]) - return SPEED_2500; - return SPEED_UNKNOWN; -} - -/* Set link speed in the MAC configuration for a specific port. */ -static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, - int speed_mbps) +static int sja1105_set_port_speed(struct sja1105_private *priv, int port, + int speed_mbps) { struct sja1105_mac_config_entry *mac; - struct device *dev = priv->ds->dev; u64 speed; - int rc;
/* On P/Q/R/S, one can read from the device via the MAC reconfiguration * tables. On E/T, MAC reconfig tables are not readable, only writable. @@ -1313,7 +1295,7 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; break; default: - dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + dev_err(priv->ds->dev, "Invalid speed %iMbps\n", speed_mbps); return -EINVAL; }
@@ -1325,11 +1307,31 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, * we need to configure the PCS only (if even that). */ if (priv->phy_mode[port] == PHY_INTERFACE_MODE_SGMII) - mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; + speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; else if (priv->phy_mode[port] == PHY_INTERFACE_MODE_2500BASEX) - mac[port].speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; - else - mac[port].speed = speed; + speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; + + mac[port].speed = speed; + + return 0; +} + +/* Write the MAC Configuration Table entry and, if necessary, the CGU settings, + * after a link speedchange for this port. + */ +static int sja1105_set_port_config(struct sja1105_private *priv, int port) +{ + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + int rc; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
/* Write to the dynamic reconfiguration tables */ rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, @@ -1390,7 +1392,8 @@ static void sja1105_mac_link_up(struct phylink_config *config, struct sja1105_private *priv = dp->ds->priv; int port = dp->index;
- sja1105_adjust_port_config(priv, port, speed); + if (!sja1105_set_port_speed(priv, port, speed)) + sja1105_set_port_config(priv, port);
sja1105_inhibit_tx(priv, BIT(port), false); } @@ -2289,8 +2292,8 @@ int sja1105_static_config_reload(struct sja1105_private *priv, { struct ptp_system_timestamp ptp_sts_before; struct ptp_system_timestamp ptp_sts_after; - int speed_mbps[SJA1105_MAX_NUM_PORTS]; u16 bmcr[SJA1105_MAX_NUM_PORTS] = {0}; + u64 mac_speed[SJA1105_MAX_NUM_PORTS]; struct sja1105_mac_config_entry *mac; struct dsa_switch *ds = priv->ds; s64 t1, t2, t3, t4; @@ -2303,14 +2306,13 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
- /* Back up the dynamic link speed changed by sja1105_adjust_port_config + /* Back up the dynamic link speed changed by sja1105_set_port_speed() * in order to temporarily restore it to SJA1105_SPEED_AUTO - which the * switch wants to see in the static config in order to allow us to * change it through the dynamic interface later. */ for (i = 0; i < ds->num_ports; i++) { - speed_mbps[i] = sja1105_port_speed_to_ethtool(priv, - mac[i].speed); + mac_speed[i] = mac[i].speed; mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO];
if (priv->xpcs[i]) @@ -2373,7 +2375,8 @@ int sja1105_static_config_reload(struct sja1105_private *priv, struct dw_xpcs *xpcs = priv->xpcs[i]; unsigned int neg_mode;
- rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]); + mac[i].speed = mac_speed[i]; + rc = sja1105_set_port_config(priv, i); if (rc < 0) goto out;