The manuals of 2K2000 says both BIT_CTRL_MODE and BYTE_CTRL_MODE are supported but the latter is recommended. Also on 2K3000, per the ACPI DSDT the GPIO controller is compatible with 2K2000, but it fails to operate GPIOs 62 and 63 (and maybe others) using BIT_CTRL_MODE. Using BYTE_CTRL_MODE also makes those 2K3000 GPIOs work.
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support") Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao xry111@xry111.site --- drivers/gpio/gpio-loongson-64bit.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c index 02f181cb219e..82d4c3aa4d2f 100644 --- a/drivers/gpio/gpio-loongson-64bit.c +++ b/drivers/gpio/gpio-loongson-64bit.c @@ -407,11 +407,11 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = {
static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = { .label = "ls2k2000_gpio", - .mode = BIT_CTRL_MODE, - .conf_offset = 0x0, - .in_offset = 0x20, - .out_offset = 0x10, - .inten_offset = 0x30, + .mode = BYTE_CTRL_MODE, + .conf_offset = 0x800, + .in_offset = 0xa00, + .out_offset = 0x900, + .inten_offset = 0xb00, };
static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {