The patch titled Subject: nilfs2: fix buffer corruption due to concurrent device reads has been added to the -mm mm-hotfixes-unstable branch. Its filename is nilfs2-fix-buffer-corruption-due-to-concurrent-device-reads.patch
This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches...
This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days
------------------------------------------------------ From: Ryusuke Konishi konishi.ryusuke@gmail.com Subject: nilfs2: fix buffer corruption due to concurrent device reads Date: Fri, 9 Jun 2023 12:57:32 +0900
As a result of analysis of a syzbot report, it turned out that in three cases where nilfs2 allocates block device buffers directly via sb_getblk, concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log header, and the super root block, that is the trailer, and when moving and writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata to be written in the allocated buffers, the stored metadata will be overwritten if a device read of the same block occurs concurrently before the write. This causes metadata corruption and misbehavior in the log write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the first or before modifying each buffer obtained with sb_getblk, and clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used to perform necessary exclusive control, and the buffer is filled to ensure that uninitialized bytes are not mixed into the data read from others. As for buffers for segment summary blocks, they are filled incrementally, so if the uptodate flag was unset on their allocation, set the flag and zero fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the memset call to zerofill the block is incorrectly specified, which can cause a buffer overflow on file systems with block sizes greater than 4KiB. In addition, if the superblock is moved within a large block, it is necessary to assume the possibility that the data in the superblock will be destroyed by zero-filling before copying. So fix these potential issues as well.
Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.com Tested-by: Ryusuke Konishi konishi.ryusuke@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org ---
fs/nilfs2/segbuf.c | 6 ++++++ fs/nilfs2/segment.c | 7 +++++++ fs/nilfs2/super.c | 23 ++++++++++++++++++++++- 3 files changed, 35 insertions(+), 1 deletion(-)
--- a/fs/nilfs2/segbuf.c~nilfs2-fix-buffer-corruption-due-to-concurrent-device-reads +++ a/fs/nilfs2/segbuf.c @@ -101,6 +101,12 @@ int nilfs_segbuf_extend_segsum(struct ni if (unlikely(!bh)) return -ENOMEM;
+ lock_buffer(bh); + if (!buffer_uptodate(bh)) { + memset(bh->b_data, 0, bh->b_size); + set_buffer_uptodate(bh); + } + unlock_buffer(bh); nilfs_segbuf_add_segsum_buffer(segbuf, bh); return 0; } --- a/fs/nilfs2/segment.c~nilfs2-fix-buffer-corruption-due-to-concurrent-device-reads +++ a/fs/nilfs2/segment.c @@ -981,10 +981,13 @@ static void nilfs_segctor_fill_in_super_ unsigned int isz, srsz;
bh_sr = NILFS_LAST_SEGBUF(&sci->sc_segbufs)->sb_super_root; + + lock_buffer(bh_sr); raw_sr = (struct nilfs_super_root *)bh_sr->b_data; isz = nilfs->ns_inode_size; srsz = NILFS_SR_BYTES(isz);
+ raw_sr->sr_sum = 0; /* Ensure initialization within this update */ raw_sr->sr_bytes = cpu_to_le16(srsz); raw_sr->sr_nongc_ctime = cpu_to_le64(nilfs_doing_gc() ? @@ -998,6 +1001,8 @@ static void nilfs_segctor_fill_in_super_ nilfs_write_inode_common(nilfs->ns_sufile, (void *)raw_sr + NILFS_SR_SUFILE_OFFSET(isz), 1); memset((void *)raw_sr + srsz, 0, nilfs->ns_blocksize - srsz); + set_buffer_uptodate(bh_sr); + unlock_buffer(bh_sr); }
static void nilfs_redirty_inodes(struct list_head *head) @@ -1780,6 +1785,7 @@ static void nilfs_abort_logs(struct list list_for_each_entry(segbuf, logs, sb_list) { list_for_each_entry(bh, &segbuf->sb_segsum_buffers, b_assoc_buffers) { + clear_buffer_uptodate(bh); if (bh->b_page != bd_page) { if (bd_page) end_page_writeback(bd_page); @@ -1791,6 +1797,7 @@ static void nilfs_abort_logs(struct list b_assoc_buffers) { clear_buffer_async_write(bh); if (bh == segbuf->sb_super_root) { + clear_buffer_uptodate(bh); if (bh->b_page != bd_page) { end_page_writeback(bd_page); bd_page = bh->b_page; --- a/fs/nilfs2/super.c~nilfs2-fix-buffer-corruption-due-to-concurrent-device-reads +++ a/fs/nilfs2/super.c @@ -372,10 +372,31 @@ static int nilfs_move_2nd_super(struct s goto out; } nsbp = (void *)nsbh->b_data + offset; - memset(nsbp, 0, nilfs->ns_blocksize);
+ lock_buffer(nsbh); if (sb2i >= 0) { + /* + * The position of the second superblock only changes by 4KiB, + * which is larger than the maximum superblock data size + * (= 1KiB), so there is no need to use memmove() to allow + * overlap between source and destination. + */ memcpy(nsbp, nilfs->ns_sbp[sb2i], nilfs->ns_sbsize); + + /* + * Zero fill after copy to avoid overwriting in case of move + * within the same block. + */ + memset(nsbh->b_data, 0, offset); + memset((void *)nsbp + nilfs->ns_sbsize, 0, + nsbh->b_size - offset - nilfs->ns_sbsize); + } else { + memset(nsbh->b_data, 0, nsbh->b_size); + } + set_buffer_uptodate(nsbh); + unlock_buffer(nsbh); + + if (sb2i >= 0) { brelse(nilfs->ns_sbh[sb2i]); nilfs->ns_sbh[sb2i] = nsbh; nilfs->ns_sbp[sb2i] = nsbp; _
Patches currently in -mm which might be from konishi.ryusuke@gmail.com are
nilfs2-fix-buffer-corruption-due-to-concurrent-device-reads.patch