From: Imre Deak imre.deak@intel.com
commit a40ee54e9a0958406469d46def03eec62aea0b69 upstream.
BIOS may leave a TypeC PHY in a connected state even though the corresponding port is disabled. This will prevent any hotplug events from being signalled (after the monitor deasserts and then reasserts its HPD) until the PHY is disconnected and so the driver will not detect a connected sink. Rebooting with the PHY in the connected state also results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit 64851a32c463e5 the PHY connected state was read out even for disabled ports and later the PHY got disconnected as a side effect of a tc_port_lock/unlock() sequence (during connector probing), hence recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: stable@vger.kernel.org # v5.16+ Cc: José Roberto de Souza jose.souza@intel.com Signed-off-by: Imre Deak imre.deak@intel.com Reviewed-by: José Roberto de Souza jose.souza@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.d... (cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86) Signed-off-by: Tvrtko Ursulin tvrtko.ursulin@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/i915/display/intel_tc.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_tc.c +++ b/drivers/gpu/drm/i915/display/intel_tc.c @@ -691,6 +691,8 @@ void intel_tc_port_sanitize(struct intel { struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); struct intel_encoder *encoder = &dig_port->base; + intel_wakeref_t tc_cold_wref; + enum intel_display_power_domain domain; int active_links = 0;
mutex_lock(&dig_port->tc_lock); @@ -702,12 +704,11 @@ void intel_tc_port_sanitize(struct intel
drm_WARN_ON(&i915->drm, dig_port->tc_mode != TC_PORT_DISCONNECTED); drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref); - if (active_links) { - enum intel_display_power_domain domain; - intel_wakeref_t tc_cold_wref = tc_cold_block(dig_port, &domain);
- dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); + tc_cold_wref = tc_cold_block(dig_port, &domain);
+ dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); + if (active_links) { if (!icl_tc_phy_is_connected(dig_port)) drm_dbg_kms(&i915->drm, "Port %s: PHY disconnected with %d active link(s)\n", @@ -716,10 +717,23 @@ void intel_tc_port_sanitize(struct intel
dig_port->tc_lock_wakeref = tc_cold_block(dig_port, &dig_port->tc_lock_power_domain); - - tc_cold_unblock(dig_port, domain, tc_cold_wref); + } else { + /* + * TBT-alt is the default mode in any case the PHY ownership is not + * held (regardless of the sink's connected live state), so + * we'll just switch to disconnected mode from it here without + * a note. + */ + if (dig_port->tc_mode != TC_PORT_TBT_ALT) + drm_dbg_kms(&i915->drm, + "Port %s: PHY left in %s mode on disabled port, disconnecting it\n", + dig_port->tc_port_name, + tc_port_mode_name(dig_port->tc_mode)); + icl_tc_phy_disconnect(dig_port); }
+ tc_cold_unblock(dig_port, domain, tc_cold_wref); + drm_dbg_kms(&i915->drm, "Port %s: sanitize mode (%s)\n", dig_port->tc_port_name, tc_port_mode_name(dig_port->tc_mode));