From: Dominique Martinet dominique.martinet@atmark-techno.com
Commit e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") added a mask check for 'part_type', but the mask used was wrong leading to the code intended for rpmb also being executed for GP3.
On some MMCs (but not all) this would make gp3 partition inaccessible: armadillo:~# head -c 1 < /dev/mmcblk2gp3 head: standard input: I/O error armadillo:~# dmesg -c [ 422.976583] mmc2: running CQE recovery [ 423.058182] mmc2: running CQE recovery [ 423.137607] mmc2: running CQE recovery [ 423.137802] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 423.237125] mmc2: running CQE recovery [ 423.318206] mmc2: running CQE recovery [ 423.397680] mmc2: running CQE recovery [ 423.397837] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 423.408287] Buffer I/O error on dev mmcblk2gp3, logical block 0, async page read
the part_type values of interest here are defined as follow: main 0 boot0 1 boot1 2 rpmb 3 gp0 4 gp1 5 gp2 6 gp3 7
so mask with EXT_CSD_PART_CONFIG_ACC_MASK (7) to correctly identify rpmb
Fixes: e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") Cc: stable@vger.kernel.org Cc: Jorge Ramirez-Ortiz jorge@foundries.io Signed-off-by: Dominique Martinet dominique.martinet@atmark-techno.com --- A couple of notes: - this doesn't fail on all eMMCs, I can still access gp3 on some models but it seems to fail reliably with micron's "G1M15L" - I've encountered this on the 5.10 backport (in 5.10.208), so that'll need to be backported everywhere the fix was taken...
Thanks! --- drivers/mmc/core/block.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 32d49100dff5..86efa6084696 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -874,10 +874,11 @@ static const struct block_device_operations mmc_bdops = { static int mmc_blk_part_switch_pre(struct mmc_card *card, unsigned int part_type) { - const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_MASK; + const unsigned int rpmb = EXT_CSD_PART_CONFIG_ACC_RPMB; int ret = 0;
- if ((part_type & mask) == mask) { + if ((part_type & mask) == rpmb) { if (card->ext_csd.cmdq_en) { ret = mmc_cmdq_disable(card); if (ret) @@ -892,10 +893,11 @@ static int mmc_blk_part_switch_pre(struct mmc_card *card, static int mmc_blk_part_switch_post(struct mmc_card *card, unsigned int part_type) { - const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_MASK; + const unsigned int rpmb = EXT_CSD_PART_CONFIG_ACC_RPMB; int ret = 0;
- if ((part_type & mask) == mask) { + if ((part_type & mask) == rpmb) { mmc_retune_unpause(card->host); if (card->reenable_cmdq && !card->ext_csd.cmdq_en) ret = mmc_cmdq_enable(card);
--- base-commit: 5847c9777c303a792202c609bd761dceb60f4eed change-id: 20240306-mmc-partswitch-c3a50b5084ae
Best regards,