On Sat, Jul 15, 2023 at 09:53:24AM +0200, Benjamin Bara wrote:
From: Benjamin Bara benjamin.bara@skidata.com
Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA).
panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like:
[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c
Use !preemptible() instead, which is basically the same check as pre-v5.2.
Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()") Cc: stable@vger.kernel.org # v5.2+ Suggested-by: Dmitry Osipenko dmitry.osipenko@collabora.com Acked-by: Wolfram Sang wsa@kernel.org Reviewed-by: Dmitry Osipenko dmitry.osipenko@collabora.com Tested-by: Nishanth Menon nm@ti.com Signed-off-by: Benjamin Bara benjamin.bara@skidata.com
For kernel 6.7 I'm having an issue when I shutdown or reboot my Rockchip RK3326 or Rockchip RK3566 based devices, and I've bisected the issue down to this specific commit.
When I shutdown or restart the device, I receive messages in the kernel log like the following:
[ 37.121148] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x3 [ 37.122178] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x3 [ 37.123212] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x3 [ 37.124226] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x3 [ 37.125242] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x3 [ 37.126133] rk3x-i2c fdd40000.i2c: irq in STATE_IDLE, ipd = 0x1
The device will also occasionally freeze instead of rebooting or shutting down. The i2c errors are consistent, but the freezing behavior is not.
Thank you.
drivers/i2c/i2c-core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 1247e6e6e975..05b8b8dfa9bd 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -29,7 +29,7 @@ int i2c_dev_irq_from_resources(const struct resource *resources, */ static inline bool i2c_in_atomic_xfer_mode(void) {
- return system_state > SYSTEM_RUNNING && irqs_disabled();
- return system_state > SYSTEM_RUNNING && !preemptible();
} static inline int __i2c_lock_bus_helper(struct i2c_adapter *adap)
-- 2.34.1