On Wed, 12 Nov 2025 16:14:19 +0100 "Kory Maincent (TI.com)" kory.maincent@bootlin.com wrote:
The vdd_mpu regulator maximum voltage was previously limited to 1.2985V, which prevented the CPU from reaching the 1GHz operating point. This limitation was put in place because voltage changes were not working correctly, causing the board to stall when attempting higher frequencies. Increase the maximum voltage to 1.3515V to allow the full 1GHz OPP to be used.
Add a TPS65219 PMIC driver fixes that properly implement the LOCK register handling, to make voltage transitions work reliably.
Hello,
What is the status on this series? Is there anything that could prevent it from being merged?
Regards,