On 11/14/25 10:09 AM, Oleksij Rempel wrote:
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the new delay value. This caused the new value to be bitwise-OR'd with the existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was incorrectly OR'd with the default 0x1B (from register value 0xDA3), leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the correct delay value is written. Physical measurements on the RGMII TX lines confirm the fix, showing the delay changing from ~1ns (before change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de
Lacking the changelog and reference to the previous submission, it took me a little to notice that the only difference is the added Cc: tag.
Please: - ask explicitly before going ahead with such repost, as manual tag propagation is sometimes preferable - always include a suitable changelog and reference to prior revisions
Thanks,
Paolo