From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
commit edcbdd57de499305e2a3737d4a73fe387f71d84c upstream.
After renaming NAND controller node name from "qpic-nand" to "nand-controller", the board DTS/DTSI also have to be updated:
Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property
Cc: stable@vger.kernel.org Fixes: 9e1e00f18afc ("ARM: dts: qcom: Fix node name for NAND controller node") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Reviewed-by: Manivannan Sadhasivam mani@kernel.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20230420072811.36947-1-krzysztof.kozlowski@linaro.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++---- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 10 +++++----- arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 12 ++++++------ 3 files changed, 15 insertions(+), 15 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -11,9 +11,9 @@ dma-controller@7984000 { status = "okay"; }; - - qpic-nand@79b0000 { - status = "okay"; - }; }; }; + +&nand { + status = "okay"; +}; --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -102,10 +102,10 @@ status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; - - qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - }; }; }; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; +}; --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -65,11 +65,11 @@ dma-controller@7984000 { status = "okay"; }; - - qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; }; }; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; +};