From: Haibo Chen haibo.chen@nxp.com
[ Upstream commit 62f0147fd4d86620853bee027800f988d3013656 ]
For clock and strobe pad of usdhc, need to config as pull down. Current pad config set these pad as both pull up and pull down, this is wrong, so fix it here. Find this issue when enable HS400ES mode on one Micron eMMC chip, CMD8 always meet CRC error in HS400ES/HS400 mode.
Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support") Signed-off-by: Haibo Chen haibo.chen@nxp.com Reviewed-by: Peng Fan peng.fan@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 69786c326db0..27f9a9f33134 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -74,7 +74,7 @@ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe @@ -84,7 +84,7 @@ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; };
@@ -102,7 +102,7 @@ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe