On Mon, Jan 16, 2023 at 04:51:43PM +0100, Greg Kroah-Hartman wrote:
From: Minsuk Kang linuxlovemin@yonsei.ac.kr
[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30
Reported-by: Dokyung Song dokyungs@yonsei.ac.kr Reported-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Reported-by: Minsuk Kang linuxlovemin@yonsei.ac.kr Signed-off-by: Minsuk Kang linuxlovemin@yonsei.ac.kr Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c index 13c25798f39a..6d868b8b441a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -572,6 +572,11 @@ int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev, u32 i; char end;
- if (chiprev >= BITS_PER_TYPE(u32)) {
brcmf_err("Invalid chip revision %u\n", chiprev);return NULL;- }
- for (i = 0; i < table_size; i++) { if (mapping_table[i].chipid == chip && mapping_table[i].revmask & BIT(chiprev))
-- 2.35.1
Clang points out that this backport is incorrect:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:577:10: error: incompatible pointer to integer conversion returning 'void *' from a function with result type 'int' [-Wint-conversion] return NULL; ^~~~ include/linux/stddef.h:8:14: note: expanded from macro 'NULL' #define NULL ((void *)0) ^~~~~~~~~~~ 1 error generated.
That should probably be something like -EINVAL for 4.14 but I am not sure, hence just the report. This code path was reworked in commit 2baa3aaee27f ("brcmfmac: introduce brcmf_fw_alloc_request() function"). Returning NULL would be treated as an error in the callers, which would require a negative return code here.
Cheers, Nathan