From: Petr Štetiar ynezz@true.cz
[ Upstream commit 36ad7022536e0c65f8baeeaa5efde11dec44808a ]
I've discovered following discrepancy in the bindings/net/ethernet.txt documentation, where it states following:
- nvmem-cells: phandle, reference to an nvmem node for the MAC address; - nvmem-cell-names: string, should be "mac-address" if nvmem is to be..
which is actually misleading and confusing. There are only two ethernet drivers in the tree, cadence/macb and davinci which supports this properties.
This nvmem-cell* properties were introduced in commit 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper"), but commit afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") forget to properly clean up this parts.
So this patch fixes the documentation by moving the nvmem-cell* properties at the appropriate places. While at it, I've removed unused include as well.
Cc: Bartosz Golaszewski bgolaszewski@baylibre.com Fixes: afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") Signed-off-by: Petr Štetiar ynezz@true.cz Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/devicetree/bindings/net/davinci_emac.txt | 2 ++ Documentation/devicetree/bindings/net/ethernet.txt | 2 -- Documentation/devicetree/bindings/net/macb.txt | 4 ++++ drivers/of/of_net.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 24c5cdaba8d2..ca83dcc84fb8 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -20,6 +20,8 @@ Required properties: Optional properties: - phy-handle: See ethernet.txt file in the same directory. If absent, davinci_emac driver defaults to 100/FULL. +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - ti,davinci-rmii-en: 1 byte, 1 means use RMII - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index cfc376bc977a..2974e63ba311 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,8 +10,6 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address; -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 3e17ac1d5d58..1a914116f4c2 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -26,6 +26,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks.
+Optional properties: +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used + Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c index 810ab0fbcccb..d820f3edd431 100644 --- a/drivers/of/of_net.c +++ b/drivers/of/of_net.c @@ -7,7 +7,6 @@ */ #include <linux/etherdevice.h> #include <linux/kernel.h> -#include <linux/nvmem-consumer.h> #include <linux/of_net.h> #include <linux/phy.h> #include <linux/export.h>