From: Erwan Le Ray erwan.leray@foss.st.com
[ Upstream commit ad7676812437a00a4c6be155fc17926069f99084 ]
Deadlock issue is seen when enabling CONFIG_PROVE_LOCKING=Y, and uart console as wakeup source. Deadlock occurs when resuming from low power mode if system is waked up via usart console. The deadlock is triggered 100% when also disabling console suspend prior to go to suspend.
Simplified call stack, deadlock condition: - stm32_console_write <-- spin_lock already held - print_circular_bug - pm_wakeup_dev_event <-- triggers lockdep as seen above - stm32_receive_chars - stm32_interrupt <-- wakeup via uart console, takes the lock
So, revisit spin_lock in stm32-usart driver: - there is no need to hold the lock to access ICR (atomic clear of status flags) - only hold the lock inside stm32_receive_chars() routine (no need to call pm_wakeup_dev_event with lock held) - keep stm32_transmit_chars() routine called with lock held
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Signed-off-by: Erwan Le Ray erwan.leray@foss.st.com Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Link: https://lore.kernel.org/r/20210304162308.8984-6-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/stm32-usart.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 91a33ec4dbb4..5ae3841a4a08 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -213,13 +213,18 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - unsigned long c; + unsigned long c, flags; u32 sr; char flag;
if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0);
+ if (threaded) + spin_lock_irqsave(&port->lock, flags); + else + spin_lock(&port->lock); + while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res, threaded)) { sr |= USART_SR_DUMMY_RX; @@ -275,9 +280,12 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) uart_insert_char(port, sr, USART_SR_ORE, c, flag); }
- spin_unlock(&port->lock); + if (threaded) + spin_unlock_irqrestore(&port->lock, flags); + else + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); - spin_lock(&port->lock); }
static void stm32_usart_tx_dma_complete(void *arg) @@ -458,8 +466,6 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr;
- spin_lock(&port->lock); - sr = readl_relaxed(port->membase + ofs->isr);
if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) @@ -473,10 +479,11 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) stm32_usart_receive_chars(port, false);
- if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) + if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) { + spin_lock(&port->lock); stm32_usart_transmit_chars(port); - - spin_unlock(&port->lock); + spin_unlock(&port->lock); + }
if (stm32_port->rx_ch) return IRQ_WAKE_THREAD; @@ -489,13 +496,9 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port);
- spin_lock(&port->lock); - if (stm32_port->rx_ch) stm32_usart_receive_chars(port, true);
- spin_unlock(&port->lock); - return IRQ_HANDLED; }