From: Michael Walle michael@walle.cc
[ Upstream commit dabea675faf16e8682aa478ff3ce65dd775620bc ]
While enabling EDAC support for the LS1028A it was discovered that the memory node has a wrong endianness setting as well as a wrong interrupt assignment. Fix both.
This was tested on a sl28 board. To force ECC errors, you can use the error injection supported by the controller in hardware (with CONFIG_EDAC_DEBUG enabled):
# enable error injection $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl # flip lowest bit of the data $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle michael@walle.cc Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 262fbad8f0ec..1b264e5e947a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -201,8 +201,8 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; };
dcfg: syscon@1e00000 {