On Wed, 2023-02-01 at 20:10 +0100, Rafael J. Wysocki wrote:
On Wed, Feb 1, 2023 at 7:06 PM Srinivas Pandruvada srinivas.pandruvada@linux.intel.com wrote:
The powerclamp cooling device cur_state shows actual idle observed by package C-state idle counters. But the implementation is not sufficient for multi package or multi die system. The cur_state value is incorrect. On these systems, these counters must be read from each package/die and somehow aggregate them. But there is no good method for aggregation.
It was not a problem when explicit CPU model addition was required to enable intel powerclamp. In this way certain CPU models could have been avoided. But with the removal of CPU model check with the availability of Package C-state counters, the driver is loaded on most of the recent systems.
For multi package/die systems, just show the actual target idle state, the system is trying to achieve. In powerclamp this is the user set state minus one.
Also there is no use of starting a worker thread for polling package C-state counters and applying any compensation.
I think that the last paragraph applies to systems with multiple dies/packages?
Yes.
Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Cc: stable@vger.kernel.org # 4.14+
drivers/thermal/intel/intel_powerclamp.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c index b80e25ec1261..64f082c584b2 100644 --- a/drivers/thermal/intel/intel_powerclamp.c +++ b/drivers/thermal/intel/intel_powerclamp.c @@ -57,6 +57,7 @@
static unsigned int target_mwait; static struct dentry *debug_dir; +static bool poll_pkg_cstate_enable;
/* user selected target */ static unsigned int set_target_ratio; @@ -261,6 +262,9 @@ static unsigned int get_compensation(int ratio) { unsigned int comp = 0;
+ if (!poll_pkg_cstate_enable) + return 0;
/* we only use compensation if all adjacent ones are good */ if (ratio == 1 && cal_data[ratio].confidence >= CONFIDENCE_OK && @@ -519,7 +523,8 @@ static int start_power_clamp(void) control_cpu = cpumask_first(cpu_online_mask);
clamping = true; - schedule_delayed_work(&poll_pkg_cstate_work, 0); + if (poll_pkg_cstate_enable) + schedule_delayed_work(&poll_pkg_cstate_work, 0);
/* start one kthread worker per online cpu */ for_each_online_cpu(cpu) { @@ -585,11 +590,15 @@ static int powerclamp_get_max_state(struct thermal_cooling_device *cdev, static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) { - if (true == clamping) - *state = pkg_cstate_ratio_cur; - else + if (true == clamping) {
This really should be
I can change that, just kept the old style. I will send an update.
if (clamping) {
+ if (poll_pkg_cstate_enable) + *state = pkg_cstate_ratio_cur; + else + *state = set_target_ratio; + } else { /* to save power, do not poll idle ratio while not clamping */ *state = -1; /* indicates invalid state */ + }
return 0; } @@ -712,6 +721,9 @@ static int __init powerclamp_init(void) goto exit_unregister; }
+ if (topology_max_packages() == 1 && topology_max_die_per_package() == 1) + poll_pkg_cstate_enable = true;
cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL, &powerclamp_cooling_ops); if (IS_ERR(cooling_dev)) { --
This fixes a rather old bug and we are late in the cycle, so I'm a bit reluctant to push it for -rc7 or -rc8. I would prefer to apply it for 6.3, but let it go before the other powerclamp driver changes from you.
Yes, that's why I rebased other patches on top of this.
This way, if anyone needs to backport it or put it into -stable, they will be able to do that without pulling in the more intrusive material.
Now, I do realize that this avoids changing the current behavior too much, but I think that it is plain confusing to return pkg_cstate_ratio_cur from powerclamp_get_cur_state() in any case. It should always return set_target_ratio IMV.
It should. It in unnecessary complications. When I use in thermald, I don't look at the returned value from cur_state as this doesn't matter if the temperature is not under control. I will change this for all cases.
Thanks, Srinivas