If endpoints halts due to a stall then the dequeue pointer read from hardware may already be set ahead of the stalled TRB. After commit 674f8438c121 ("xhci: split handling halted endpoints into two steps") in 5.12 xhci driver won't issue a Set TR Dequeue if hardware dequeue pointer is already in the right place.
Turns out the "Set TR Dequeue pointer" command is anyway needed as it in addition to moving the dequeue pointer also clears endpoint state and cache.
Reported-by: Peter Ganzhorn peter.ganzhorn@googlemail.com Tested-by: Peter Ganzhorn peter.ganzhorn@googlemail.com Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com --- drivers/usb/host/xhci-ring.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 256d336354a0..6acd2329e08d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -933,14 +933,18 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep) continue; } /* - * If ring stopped on the TD we need to cancel, then we have to + * If a ring stopped on the TD we need to cancel then we have to * move the xHC endpoint ring dequeue pointer past this TD. + * Rings halted due to STALL may show hw_deq is past the stalled + * TD, but still require a set TR Deq command to flush xHC cache. */ hw_deq = xhci_get_hw_deq(xhci, ep->vdev, ep->ep_index, td->urb->stream_id); hw_deq &= ~0xf;
- if (trb_in_td(xhci, td->start_seg, td->first_trb, + if (td->cancel_status == TD_HALTED) { + cached_td = td; + } else if (trb_in_td(xhci, td->start_seg, td->first_trb, td->last_trb, hw_deq, false)) { switch (td->cancel_status) { case TD_CLEARED: /* TD is already no-op */