Currently, for the high resolution PWMs, the resolution, clock, pre-divider and exponent are being selected based on period. Basically, the implementation loops over each one of these and tries to find the closest (higher) period based on the following formula:
period * refclk prediv_exp = log2 ------------------------------------- NSEC_PER_SEC * pre_div * resolution
Since the resolution is power of 2, the actual period resulting is usually higher than what the resolution allows. That's why the duty cycle requested needs to be capped to the maximum value allowed by the resolution (known as PWM size).
Here is an example of how this can happen:
For a requested period of 5000000, the best clock is 19.2MHz, the best prediv is 5, the best exponent is 6 and the best resolution is 256.
Then, the pwm value is determined based on requested period and duty cycle, best prediv, best exponent and best clock, using the following formula:
duty * refclk pwm_value = ---------------------------------------------- NSEC_PER_SEC * prediv * (1 << prediv_exp)
So in this specific scenario:
(5000000 * 19200000) / (1000000000 * 5 * (1 << 64)) = 300
With a resolution of 8 bits, this pwm value obviously goes over.
Therefore, the max pwm value allowed needs to be 255.
If not, the PMIC internal logic will only value that is under the set PWM size, resulting in a wrapped around PWM value.
This has been observed on Lenovo Thinkpad T14s Gen6 (LCD panel version) which uses one of the PMK8550 to control the LCD backlight.
Fix the value of the PWM by capping to a max based on the chosen resolution (PWM size).
Cc: stable@vger.kernel.org # 6.4 Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM") Signed-off-by: Abel Vesa abel.vesa@linaro.org --- Note: This fix is blocking backlight support on Lenovo Thinkpad T14s Gen6 (LCD version), for which I have patches ready to send once this patch is agreed on (review) and merged. --- drivers/leds/rgb/leds-qcom-lpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c index f3c9ef2bfa572f9ee86c8b8aa37deb8231965490..146cd9b447787bf170310321e939022dfb176e9f 100644 --- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -529,7 +529,7 @@ static void lpg_calc_duty(struct lpg_channel *chan, uint64_t duty) unsigned int clk_rate;
if (chan->subtype == LPG_SUBTYPE_HI_RES_PWM) { - max = LPG_RESOLUTION_15BIT - 1; + max = BIT(lpg_pwm_resolution_hi_res[chan->pwm_resolution_sel]) - 1; clk_rate = lpg_clk_rates_hi_res[chan->clk_sel]; } else { max = LPG_RESOLUTION_9BIT - 1;
--- base-commit: 50a0c754714aa3ea0b0e62f3765eb666a1579f24 change-id: 20250220-leds-qcom-lpg-fix-max-pwm-on-hi-res-067e8782a79b
Best regards,