6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wayne Chang waynec@nvidia.com
commit 24c63c590adca310e0df95c77cf7aa5552bc3fc5 upstream.
The logic that drives the pad calibration values resides in the controller reset domain and so the calibration values are only being captured when the controller is out of reset. However, by clearing the CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set while the controller is in reset.
The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the trk_hw_mode flag, but this dependency is not necessary. Instead, introduce a new flag, trk_update_on_idle, to independently control this bit.
Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang waynec@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com Tested-by: Jon Hunter jonathanh@nvidia.com Link: https://lore.kernel.org/r/20250519090929.3132456-2-waynec@nvidia.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/phy/tegra/xusb-tegra186.c | 14 ++++++++------ drivers/phy/tegra/xusb.h | 1 + 2 files changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -648,14 +648,15 @@ static void tegra186_utmi_bias_pad_power udelay(100); }
- if (padctl->soc->trk_hw_mode) { - value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); - value |= USB2_TRK_HW_MODE; + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); + if (padctl->soc->trk_update_on_idle) value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE; - padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); - } else { + if (padctl->soc->trk_hw_mode) + value |= USB2_TRK_HW_MODE; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2); + + if (!padctl->soc->trk_hw_mode) clk_disable_unprepare(priv->usb2_trk_clk); - } }
static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) @@ -1726,6 +1727,7 @@ const struct tegra_xusb_padctl_soc tegra .supports_gen2 = true, .poll_trk_completed = true, .trk_hw_mode = true, + .trk_update_on_idle = true, .supports_lp_cfg_en = true, }; EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc); --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -434,6 +434,7 @@ struct tegra_xusb_padctl_soc { bool need_fake_usb3_port; bool poll_trk_completed; bool trk_hw_mode; + bool trk_update_on_idle; bool supports_lp_cfg_en; };