From: Pali Rohár pali@kernel.org
commit 46ef6090dbf590711cb12680b6eafde5fa21fe87 upstream.
Commit 366697018c9a ("PCI: aardvark: Add PHY support") introduced configuration of PCIe Reference clock via PCIE_CORE_REF_CLK_REG register, but did it incorrectly.
PCIe Reference clock differential pair is routed from system board to endpoint card, so on CPU side it has output direction. Therefore it is required to enable transmitting and disable receiving.
Default configuration according to Armada 3700 Functional Specifications is enabled receiver part and disabled transmitter.
We need this change because otherwise PCIe Reference clock is configured to some undefined state when differential pair is used for both transmitting and receiving.
Fix this by disabling receiver part.
Link: https://lore.kernel.org/r/20211005180952.6812-6-kabel@kernel.org Fixes: 366697018c9a ("PCI: aardvark: Add PHY support") Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Marek Behún kabel@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/pci-aardvark.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -98,6 +98,7 @@ #define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10) #define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14) #define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1) +#define PCIE_CORE_REF_CLK_RX_ENABLE BIT(2) #define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30) #define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40) #define PCIE_MSG_PM_PME_MASK BIT(7) @@ -529,9 +530,15 @@ static void advk_pcie_setup_hw(struct ad u32 reg; int i;
- /* Enable TX */ + /* + * Configure PCIe Reference clock. Direction is from the PCIe + * controller to the endpoint card, so enable transmitting of + * Reference clock differential signal off-chip and disable + * receiving off-chip differential signal. + */ reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG); reg |= PCIE_CORE_REF_CLK_TX_ENABLE; + reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE; advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
/* Set to Direct mode */