The bounce buffer is gone from the MMC core, and now we found out that there are some (crippled) i.MX boards out there that have broken ADMA (cannot do scatter-gather), and broken PIO so they must use SDMA. Closer examination shows a less significant slowdown also on SDMA-only capable Laptop hosts.
SDMA sets down the number of segments to one, so that each segment gets turned into a singular request that ping-pongs to the block layer before the next request/segment is issued.
Apparently it happens a lot that the block layer send requests that include a lot of physically discontigous segments. My guess is that this phenomenon is coming from the file system.
These devices that cannot handle scatterlists in hardware can see major benefits from a DMA-contigous bounce buffer.
This patch accumulates those fragmented scatterlists in a physically contigous bounce buffer so that we can issue bigger DMA data chunks to/from the card.
When tested with thise PCI-integrated host (1217:8221) that only supports SDMA: 0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05) This patch gave ~1Mbyte/s improved throughput on large reads and writes when testing using iozone than without the patch.
On the i.MX SDHCI controllers on the crippled i.MX 25 and i.MX 35 the patch restores the performance to what it was before we removed the bounce buffers, and then some: performance is better than ever because we now allocate a bounce buffer the size of the maximum single request the SDMA engine can handle. On the PCI laptop this is 256K, whereas with the old bounce buffer code it was 64K max.
Cc: Pierre Ossman pierre@ossman.eu Cc: Benoît Thébaudeau benoit@wsystem.com Cc: Fabio Estevam fabio.estevam@nxp.com Cc: stable@vger.kernel.org Fixes: de3ee99b097d ("mmc: Delete bounce buffer handling") Tested-by: Benjamin Beckmeyer beckmeyer.b@rittal.de Signed-off-by: Linus Walleij linus.walleij@linaro.org --- ChangeLog v2->v3: - Rewrite the commit message a bit - Add Benjamin's Tested-by - Add Fixes and stable tags ChangeLog v1->v2: - Skip the remapping and fiddling with the buffer, instead use dma_alloc_coherent() and use a simple, coherent bounce buffer. - Couple kernel messages to ->parent of the mmc_host as it relates to the hardware characteristics. --- drivers/mmc/host/sdhci.c | 94 +++++++++++++++++++++++++++++++++++++++++++----- drivers/mmc/host/sdhci.h | 3 ++ 2 files changed, 89 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index e9290a3439d5..97d4c6fc1159 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -502,8 +502,20 @@ static int sdhci_pre_dma_transfer(struct sdhci_host *host, if (data->host_cookie == COOKIE_PRE_MAPPED) return data->sg_count;
- sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - mmc_get_dma_dir(data)); + /* Bounce write requests to the bounce buffer */ + if (host->bounce_buffer) { + if (mmc_get_dma_dir(data) == DMA_TO_DEVICE) { + /* Copy the data to the bounce buffer */ + sg_copy_to_buffer(data->sg, data->sg_len, + host->bounce_buffer, host->bounce_buffer_size); + } + /* Just a dummy value */ + sg_count = 1; + } else { + /* Just access the data directly from memory */ + sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + mmc_get_dma_dir(data)); + }
if (sg_count == 0) return -ENOSPC; @@ -858,8 +870,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) SDHCI_ADMA_ADDRESS_HI); } else { WARN_ON(sg_cnt != 1); - sdhci_writel(host, sg_dma_address(data->sg), - SDHCI_DMA_ADDRESS); + /* Bounce buffer goes to work */ + if (host->bounce_buffer) + sdhci_writel(host, host->bounce_addr, + SDHCI_DMA_ADDRESS); + else + sdhci_writel(host, sg_dma_address(data->sg), + SDHCI_DMA_ADDRESS); } }
@@ -2248,7 +2265,12 @@ static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
mrq->data->host_cookie = COOKIE_UNMAPPED;
- if (host->flags & SDHCI_REQ_USE_DMA) + /* + * No pre-mapping in the pre hook if we're using the bounce buffer, + * for that we would need two bounce buffers since one buffer is + * in flight when this is getting called. + */ + if (host->flags & SDHCI_REQ_USE_DMA && !host->bounce_buffer) sdhci_pre_dma_transfer(host, mrq->data, COOKIE_PRE_MAPPED); }
@@ -2352,8 +2374,19 @@ static bool sdhci_request_done(struct sdhci_host *host) struct mmc_data *data = mrq->data;
if (data && data->host_cookie == COOKIE_MAPPED) { - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - mmc_get_dma_dir(data)); + if (host->bounce_buffer) { + /* On reads, copy the bounced data into the sglist */ + if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) { + sg_copy_from_buffer(data->sg, data->sg_len, + host->bounce_buffer, + host->bounce_buffer_size); + } + } else { + /* Unmap the raw data */ + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, + mmc_get_dma_dir(data)); + } data->host_cookie = COOKIE_UNMAPPED; } } @@ -2636,7 +2669,12 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) */ if (intmask & SDHCI_INT_DMA_END) { u32 dmastart, dmanow; - dmastart = sg_dma_address(host->data->sg); + + if (host->bounce_buffer) + dmastart = host->bounce_addr; + else + dmastart = sg_dma_address(host->data->sg); + dmanow = dmastart + host->data->bytes_xfered; /* * Force update to the next DMA block boundary. @@ -3713,6 +3751,43 @@ int sdhci_setup_host(struct sdhci_host *host) */ mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
+ if (mmc->max_segs == 1) { + unsigned int max_blocks; + unsigned int max_seg_size; + + max_seg_size = mmc->max_req_size; + max_blocks = max_seg_size / 512; + dev_info(mmc->parent, "host only supports SDMA, activate bounce buffer\n"); + + /* + * When we just support one segment, we can get significant speedups + * by the help of a bounce buffer to group scattered reads/writes + * together. + * + * TODO: is this too big? Stealing too much memory? The old bounce + * buffer is max 64K. This should be the 512K that SDMA can handle + * if I read the code above right. Anyways let's try this. + * FIXME: use devm_* + */ + host->bounce_buffer = dma_alloc_coherent(mmc->parent, max_seg_size, + &host->bounce_addr, GFP_KERNEL); + if (!host->bounce_buffer) { + dev_err(mmc->parent, + "failed to allocate %u bytes for bounce buffer\n", + max_seg_size); + return -ENOMEM; + } + host->bounce_buffer_size = max_seg_size; + + /* Lie about this since we're bouncing */ + mmc->max_segs = max_blocks; + mmc->max_seg_size = max_seg_size; + + dev_info(mmc->parent, + "bounce buffer: bounce up to %u segments into one, max segment size %u bytes\n", + max_blocks, max_seg_size); + } + return 0;
unreg: @@ -3743,6 +3818,9 @@ void sdhci_cleanup_host(struct sdhci_host *host) host->align_addr); host->adma_table = NULL; host->align_buffer = NULL; + if (host->bounce_buffer) + dma_free_coherent(mmc->parent, host->bounce_buffer_size, + host->bounce_buffer, host->bounce_addr); } EXPORT_SYMBOL_GPL(sdhci_cleanup_host);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 54bc444c317f..865e09618d22 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -440,6 +440,9 @@ struct sdhci_host {
int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ + char *bounce_buffer; /* For packing SDMA reads/writes */ + dma_addr_t bounce_addr; + size_t bounce_buffer_size;
const struct sdhci_ops *ops; /* Low level hw interface */