From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit 71f8af1110101facfad68989ff91f88f8e2c3e22 ]
Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ) fails to fix up alignment faults, eventually resulting in a kernel oops.
The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4bf181 ("ARM: save and reset the address limit when entering an exception"). This is because the address limit is set back to TASK_SIZE on exception entry, and, although it is restored on exception exit, the domain register is not.
Hence, this sequence can occur:
interrupt pt_regs->addr_limit = addr_limit // USER_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER interrupt pt_regs->addr_limit = addr_limit // KERNEL_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER ... set_fs(old_fs) addr_limit = USER_DS dacr.kernel = DOMAIN_CLIENT ... addr_limit = pt_regs->addr_limit // KERNEL_DS interrupt returns
At this point, addr_limit is correctly restored to KERNEL_DS for __probe_kernel_read() to continue execution, but dacr.kernel is not, it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT.
This would not have happened prior to the mentioned commit, because addr_limit would remain KERNEL_DS, so get_fs() would have returned KERNEL_DS, and so would correctly nest.
This commit fixes the problem by also saving the DACR on exception entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are enabled, and resetting the DACR appropriately on exception entry to match addr_limit and PAN settings.
Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Tomas Paukrt tomas.paukrt@advantech.cz Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/uaccess-asm.h | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h index e46468b91eaa..907571fd05c6 100644 --- a/arch/arm/include/asm/uaccess-asm.h +++ b/arch/arm/include/asm/uaccess-asm.h @@ -67,15 +67,21 @@ #endif .endm
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS) #define DACR(x...) x #else #define DACR(x...) #endif
/* - * Save the address limit on entry to a privileged exception and - * if using PAN, save and disable usermode access. + * Save the address limit on entry to a privileged exception. + * + * If we are using the DACR for kernel access by the user accessors + * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain + * back to client mode, whether or not \disable is set. + * + * If we are using SW PAN, set the DACR user domain to no access + * if \disable is set. */ .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable ldr \tmp1, [\tsk, #TI_ADDR_LIMIT] @@ -84,8 +90,17 @@ DACR( mrc p15, 0, \tmp0, c3, c0, 0) DACR( str \tmp0, [sp, #SVC_DACR]) str \tmp1, [sp, #SVC_ADDR_LIMIT] - .if \disable - uaccess_disable \tmp0 + .if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN) + /* kernel=client, user=no access */ + mov \tmp2, #DACR_UACCESS_DISABLE + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync + .elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS) + /* kernel=client */ + bic \tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL) + orr \tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT) + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync .endif .endm