From: Tony Lindgren tony@atomide.com
commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream.
We have an interrupt handler for the wake-up GPIO pin, but we're missing the code to wake-up the system. This can cause timeouts receiving data for the UART that shares the wake-up GPIO pin with the USB PHY.
All we need to do is just wake the system and kick the autosuspend timeout to fix the issue.
Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Cc: Marcel Partap mpartap@gmx.net Cc: Merlijn Wajer merlijn@wizzup.org Cc: Michael Scott hashcode0f@gmail.com Cc: NeKit nekit1000@gmail.com Cc: Pavel Machek pavel@ucw.cz Cc: Sebastian Reichel sre@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/phy/motorola/phy-mapphone-mdm6600.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -224,10 +224,24 @@ static irqreturn_t phy_mdm6600_wakeirq_t { struct phy_mdm6600 *ddata = data; struct gpio_desc *mode_gpio1; + int error, wakeup;
mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1]; - dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", - gpiod_get_value(mode_gpio1)); + wakeup = gpiod_get_value(mode_gpio1); + if (!wakeup) + return IRQ_NONE; + + dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", wakeup); + error = pm_runtime_get_sync(ddata->dev); + if (error < 0) { + pm_runtime_put_noidle(ddata->dev); + + return IRQ_NONE; + } + + /* Just wake-up and kick the autosuspend timer */ + pm_runtime_mark_last_busy(ddata->dev); + pm_runtime_put_autosuspend(ddata->dev);
return IRQ_HANDLED; }