6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman mathias.nyman@linux.intel.com
commit b69dfcab6894b1fed5362a364411502a7469fce3 upstream.
A usb device caught behind a link in ss.Inactive error state needs to be reset to recover. A VDEV_PORT_ERROR flag is used to track this state, preventing new transfers from being queued until error is cleared.
This flag may be left uncleared if link goes to error state between two resets, and print the following message:
"xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive"
Fix setting and clearing the flag.
The flag is cleared after hub driver has successfully reset the device when hcd->reset_device is called. xhci-hcd issues an internal "reset device" command in this callback, and clear all flags once the command completes successfully.
This command may complete with a context state error if slot was recently reset and is already in the defauilt state. This is treated as a success but flag was left uncleared.
The link state field is also unreliable if port is currently in reset, so don't set the flag in active reset cases. Also clear the flag immediately when link is no longer in ss.Inactive state and port event handler detects a completed reset.
This issue was discovered while debugging kernel bugzilla issue 220491. It is likely one small part of the problem, causing some of the failures, but root cause remains unknown
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491 Fixes: b8c3b718087b ("usb: xhci: Don't try to recover an endpoint if port is in error state.") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-ring.c | 15 ++++++++++----- drivers/usb/host/xhci.c | 1 + 2 files changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1950,6 +1950,7 @@ static void xhci_cavium_reset_phy_quirk(
static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { + struct xhci_virt_device *vdev = NULL; struct usb_hcd *hcd; u32 port_id; u32 portsc, cmd_reg; @@ -1981,6 +1982,9 @@ static void handle_port_status(struct xh goto cleanup; }
+ if (port->slot_id) + vdev = xhci->devs[port->slot_id]; + /* We might get interrupts after shared_hcd is removed */ if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) { xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n"); @@ -2003,10 +2007,11 @@ static void handle_port_status(struct xh usb_hcd_resume_root_hub(hcd); }
- if (hcd->speed >= HCD_USB3 && - (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) { - if (port->slot_id && xhci->devs[port->slot_id]) - xhci->devs[port->slot_id]->flags |= VDEV_PORT_ERROR; + if (vdev && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) { + if (!(portsc & PORT_RESET)) + vdev->flags |= VDEV_PORT_ERROR; + } else if (vdev && portsc & PORT_RC) { + vdev->flags &= ~VDEV_PORT_ERROR; }
if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { @@ -2064,7 +2069,7 @@ static void handle_port_status(struct xh * so the roothub behavior is consistent with external * USB 3.0 hub behavior. */ - if (port->slot_id && xhci->devs[port->slot_id]) + if (vdev) xhci_ring_device(xhci, port->slot_id); if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) { xhci_test_and_clear_bit(xhci, port, PORT_PLC); --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3818,6 +3818,7 @@ static int xhci_discover_or_reset_device xhci_get_slot_state(xhci, virt_dev->out_ctx)); xhci_dbg(xhci, "Not freeing device rings.\n"); /* Don't treat this as an error. May change my mind later. */ + virt_dev->flags = 0; ret = 0; goto command_cleanup; case COMP_SUCCESS: