From: Hans de Goede hdegoede@redhat.com
commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.
Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item.
There are 2 problems with this:
1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly
2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval
Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0.
There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item.
Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item.
Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/power/supply/bq27xxx_battery.c | 22 +++++++++------------- include/linux/power/bq27xxx_battery.h | 1 + 2 files changed, 10 insertions(+), 13 deletions(-)
--- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -1807,7 +1807,7 @@ static void bq27xxx_battery_update_unloc
di->last_update = jiffies;
- if (poll_interval > 0) + if (!di->removed && poll_interval > 0) mod_delayed_work(system_wq, &di->work, poll_interval * HZ); }
@@ -2138,22 +2138,18 @@ EXPORT_SYMBOL_GPL(bq27xxx_battery_setup)
void bq27xxx_battery_teardown(struct bq27xxx_device_info *di) { - /* - * power_supply_unregister call bq27xxx_battery_get_property which - * call bq27xxx_battery_poll. - * Make sure that bq27xxx_battery_poll will not call - * schedule_delayed_work again after unregister (which cause OOPS). - */ - poll_interval = 0; - - cancel_delayed_work_sync(&di->work); - - power_supply_unregister(di->bat); - mutex_lock(&bq27xxx_list_lock); list_del(&di->list); mutex_unlock(&bq27xxx_list_lock);
+ /* Set removed to avoid bq27xxx_battery_update() re-queuing the work */ + mutex_lock(&di->lock); + di->removed = true; + mutex_unlock(&di->lock); + + cancel_delayed_work_sync(&di->work); + + power_supply_unregister(di->bat); mutex_destroy(&di->lock); } EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown); --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -68,6 +68,7 @@ struct bq27xxx_device_info { struct bq27xxx_access_methods bus; struct bq27xxx_reg_cache cache; int charge_design_full; + bool removed; unsigned long last_update; struct delayed_work work; struct power_supply *bat;