From: Dario Binacchi dario.binacchi@amarulasolutions.com
[ Upstream commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 ]
Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory.
------------------------------------------------------------------------- | features | CAN1 | CAN2 | CAN 3 | ------------------------------------------------------------------------- | SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte | ------------------------------------------------------------------------- | Filters | 26 filters shared between CAN1 & CAN2 | 14 filters | -------------------------------------------------------------------------
Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulas... Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32f746.dtsi | 47 ++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 014b416f57e6f..78d1b96e83aac 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -304,6 +304,23 @@ rtc: rtc@40002800 { status = "disabled"; };
+ can3: can@40003400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40003400 0x200>; + interrupts = <104>, <105>, <106>, <107>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN3)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + st,gcan = <&gcan3>; + status = "disabled"; + }; + + gcan3: gcan@40003600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40003600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -384,6 +401,36 @@ i2c4: i2c@40006000 { status = "disabled"; };
+ can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + + gcan1: gcan@40006600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40006600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + }; + + can2: can@40006800 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006800 0x200>; + interrupts = <63>, <64>, <65>, <66>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN2)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>; + st,can-secondary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>;