From: Claudiu Beznea claudiu.beznea@microchip.com
[ Upstream commit 7f41d52ced9e1b7ed4ff8e1ae9cacbf46b64e6db ]
Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/at91-sama7g5ek.dts | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index be51c1dbb4595..2038e387be288 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -169,8 +169,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -188,8 +188,8 @@
vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -209,8 +209,8 @@
vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -229,7 +229,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -248,8 +248,8 @@
vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on;
regulator-state-standby {